Solution for Allowing Thule T2 Classic Bike Rack to Secure Fat Tire Bike

Question

Question:

When i try to lock down my support arm on my fat tire bike i might be able to get one click if i really push down really hard . Is that okey or can i get a longer support arm. Have a 9940 T2 classic bike rack.

asked by: Jimmy T

0

Expert Reply:

Do you have the fat tire holder part # 7521568001 for the rear and part # 8523598001 for the front on your T2 Classic?

If not that will help get the tire low enough to secure it. Otherwise you may want to deflate the tires slightly.

expert reply by: Jameson C

0

Answer 1

The square tubing that the Replacement Wheel Hoops for Swagman G10 Bike Series Bike Carriers, part #G1025 are designed to fit measure 1-1/4 X 1-1/4 inches.

view full answer...

Answer 2

Thanks for getting me the pictures of your Thule T2! From that I can tell you have the T2 Classic like #TH9044 and the correct wheel holder would be the part #7521568001. This would also work on the #TH9044-TH9046.

view full answer...

Answer 3

Replacement Fat Tire Rear Wheel Holder and Strap #7521568001 is the same one that comes with the T2 Classic bike racks. There is a way that the strap has to be oriented in the wheel holder to fit wider tires. First you remove the strap from the…

view full answer...

Answer 4

The Replacement Fat Tire Wheel Strap for Thule T2 Classic Platform Bike Racks #8527642001 is the only strap for the Thule T2 Classic Bike Rack #TH9045. The strap must be ran differently when used with tires over 3" wide on your rack. I have…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 7

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 8

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 9

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

I have the perfect bike rack for your Electra Townie and for this I recommend the Saris Freedom 2 Bike Platform Rack part #SA4412B. The reason I recommend this bike rack over the Malone rack is because you don't need to use an adapter bar at all.…

view full answer...

Answer 12

Yes, it does. The Hollywood Racks LED Light Bar item #HLY54RR is wired for a 4-way but comes with an adapter that will plug into a 7-way like yours to power the lights.

view full answer...