Bike Rack Recommendation that is Easy to Load/Unload and Install/Remove From Vehicle

Question

Question:

Hi. I am looking for a bike rack for two hybrids for a hitch on a 2017 Jeep Cherokee. I would like something that is easy to install onto the hitch and easy to remove. One of the bikes is a bit larger than the other as my husband is 5 ft 6. Which would you recommend. thanks. GREAT Website .. Great Videos. Thanks

asked by: Melonie

0

Expert Reply:

I really like the Saris SuperClamp EX part # SA4025F. This is a lightweight platform rack (which is normally an unheard of combo). That means it'll be easy to install and remove from your vehicle since it's light, but also it'll be very easy to load bikes on since it's a platform rack.

This rack also only touches bikes at the tire so it protects any damage to delicate frame materials or finishes.

expert reply by: Jameson C

0

click to enlarge

Gerry B.

8/7/2020

would this work for cruiser type ebikes with fenders?

Reply

Chris R.

8/18/2020

The Saris SuperClamp # SA4025F isn't a good option for your Cruiser since the hooks need to secure over the wheels - this will either press down onto the fender (potentially damaging them) or you'd need to tilt them further down the wheel which won't provide a secure enough attachment. A much better option is a frame-mount carrier like the Yakima OnRamp # Y36FR, which also features an integrated ramp to help with loading.

Reply

Answer 1

For a 2 bike rack for both your vehicles the Saris SuperClamp EX2 part #SA4025F that you referenced would be a great choice. This is a very versatile rack that would fit both of your vehicles well. This American-made rack uses wheel mounts instead of…

view full answer...

Answer 2

As you probably know there are two ways a 6-Way trailer connector can be wired. One uses the center pin as the 12-volt power accessory feed, the other uses the center pin for the brake output circuit. If the adapter is one way but the trailer is the…

view full answer...

Answer 3

In order to install a trailer hitch on your travel trailer, I recommend using the Curt Adjustable Trailer Hitch Receiver part #C13701 which has a 500 lb tongue weight capacity so you shouldn't have any issues with your 400 lb motorcycle and…

view full answer...

Answer 4

We carry a 3,500 lb axle that comes with brake assemblies, part #e43SR. Only thing is we only carry the axle in one length. This axles is 89 inches from hub face to hub face and 74 inches from spring seats so I think it would be too long. Your best…

view full answer...

Answer 5

Yes, the Optronics LED RV Interior Double Dome Light #RVILL34 will work with a dimmer. We have asked the manufacturer, Optronics, about this exact issue before and they have confirmed for us that this light is able to be dimmed so it'll be great…

view full answer...

Answer 6

For your Shurflo 2088-422-444 water pump on your camper the water pump part #LC689052 has the same output and psi rating as well.

view full answer...

Answer 7

The Full Size Locking Steel Flush Door Latch #L3980 is designed to fit 1-1/16 inch thick doors and mounts in a hole that is 4-5/8 X 3-3/8 inches. If there are no screws visible, then your existing latch is likely welded on, and you will probably have…

view full answer...

Answer 8

For your 2005 Ford Escape, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver Class III - 2", #75751. This is a customized fit for your vehicle. It will allow proper clearance between vehicle parts including the muffler. Although contact…

view full answer...

Answer 9

For dirt and gravel applications the best tow dolly solution we'll have is the Trailer Valet RVR9 Remote-Controlled Trailer Dolly #TVRVR9 which is only solution we can say would be safe for your application. Using a standard tow dolly in your…

view full answer...

Answer 10

I reached out to my contact at Thule and she said for the SSD round side rails on your 2018 Subaru Impreza the Thule Evo Raised Rail Roof Rack that consists of #TH711420 for the two 53 inch WingBar Crossbars in Black or #TH711400 for Silver and…

view full answer...

Answer 11

For your 4Runner the Malone AirFlow2 Roof Rack - 58" Long #MPG216 would be a great fit. This roof rack attaches to the raised side rails on the cab of your truck and includes locks to help secure it and prevent theft.

view full answer...

Answer 12

It sounds like you have determined the correct amount of rise you would need in order for you to tow your trailer level. But just for good measure I attached a link to the right that details how to pick the correct rise/drop ball mount for a setup.…

view full answer...