Over The Cab Truck Bed Ladder Rack for 2017 Ford F-250 Crew Cab With a 6-3/4 Bed

Question

Question:

Looking for a ladder rack for a 2017 F250XLT Super Duty with a Crew Cab that goes over the cab Thanks

asked by: David S

1

Helpful Expert Reply:

I have the perfect over the cab ladder rack for your 2017 Ford F-250 Crew Cab, the Thule TracRac SR Sliding Truck Bed Ladder Rack w/ Cantilever - 1,250 lbs # TH43003XT-785EX.

expert reply by: Conner L

1

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 5

Based on the information I could find for the DICO 45264 is was popular on ShoreLand'r trailers. This would require the Idler Hub #AKIHUB-545-35-G-EZ-K with the Grease Seal #168255TB used instead of the seal included with the hub. We currently do…

view full answer...

Answer 6

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 7

I checked with Thule and they do offer a TracRac SR Cantilever ladder rack solution with the part #TH57RV for the ladder rack and then for the cantilever extension part #TH24002XT.

view full answer...

Answer 8

The Cantilever Extension for Thule TracRac SR, G2, and T-Rac Pro2 Ladder Racks #TH24002XT is currently (August 2019) only available in silver. I reached out to my contact at Thule and she said that so far they haven't discussed any plans of…

view full answer...

Answer 9

Usually ladder racks use the inside edge of the top of the bed site to attach to the vehicle, but luckily there are exceptions to that. The Thule TracRac SR is typically compatible with tonneau covers that mount to the inside edges of the truck bed.…

view full answer...

Answer 10

I really wish we had an easy solution, but the smart tow setup of your 2019 Ford F-150 won't allow the 12 volt circuit to be active without an actual trailer connected. That said I do have an option to bypass the factory wiring and give you an…

view full answer...

Answer 11

The silver color Thule TracRac Ladder Racks such as part #TH43002XT-501 feature a dual-stage powder coat finish. If the powder coat gets chipped off in certain areas you will just want to use a standard silver spray paint and clear coat on the bare…

view full answer...

Answer 12

Sorry to hear a rail broke on your Thule TracRac SR! The #TH43003XT-785EX you purchased for your '22 Ford F-250 with the 6-3/4' bed does have a limited lifetime warranty so you can see if the rail is covered under warranty depending on…

view full answer...

Over The Cab Truck Bed Ladder Rack for 2017 Ford F-250 Crew Cab With a 6-3/4 Bed

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching