Recommended Roof Rack for 2017 Nissan Rogue With Naked Roof

Question

Question:

Im looking for a rack system for. 2017 Nissan Rogue with a naked roof.

asked by: Greg

0

Expert Reply:

For your 2017 Nissan Rogue I highly recommend the Rhino-Rack ROC25 Roof Rack for Naked Roofs # RR85QR.

This rack has Vortex Aero crossbars with rubber strips in the channel to minimize noise and drag that are prevalent in other crossbars. What a lot of people really like about this rack is the look - the bars do not extend past the legs for a clean and sleek design that mimics what factory roof racks look like.

expert reply by: Kyle S

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 4

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

To add a hitch to your 2024 Chevrolet Trailblazer, I recommend the Draw-Tite item #DT55GR. This hitch is custom fit and bolts to your Chevy with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Uni servo and duo servo is basically the style of wheel cylinder. It basically puts pressure on either side of the cylinder. The styles are interchangeable so if you have one style over the other you can go with either style. As long as your drum…

view full answer...

Answer 9

The most likely place for brake fluid to be leaking out of your hydraulic brake system is at the fittings or master cylinder. To check the fittings, chock the trailer wheels and back up the trailer so that the brakes engage. With the actuator engaged…

view full answer...

Answer 10

The MTI number on your 8-201 hubs is simply a casting number. It does not indicate any information about the hubs or have anything to do with the actual part number. I'm not surprised to hear you have different outer bearings between the two…

view full answer...

Recommended Roof Rack for 2017 Nissan Rogue With Naked Roof

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching