What is the Drop/Rise Measurement for Lippert Kwikee 28 Series Electric Step LC3747451

Question

Question:

what is the drop and rise measurment

asked by: Joesph S

1

Helpful Expert Reply:

For the Kwikee step # LC3747451 it measures 9.33 inches from the top of the mounting surface to the bottom of the step (when the step is out). The distance from the top of the step to the top of the mounting surface is 7 inches. So the drop/rise is 7 inches.

expert reply by: Michael H

1

Answer 1

The correct replacement for a Kwikee Step Motor 369545 is the Replacement Motor for Kwikee Electric RV Steps part #LC379147.

view full answer...

Answer 2

Yes, the Lend-a-Hand Extra Large Folding Grab Handle for RVs #AM-533 that you referenced will fit your 2015 Forest River Cherokee 16BHS. The mounting bracket dimensions will be the same as what you have since this was designed to be as universal as…

view full answer...

Answer 3

I checked with Kwikee and the correct replacement motor you need for your setup that has the LCI part number 369545 is the part #LC379147.

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 11

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

What is the Drop/Rise Measurement for Lippert Kwikee 28 Series Electric Step LC3747451

Product Page this Question was Asked From

Continue Researching