Recommended Towing Components for 2015 Nissan Rogue
Question:
hi, i have a 15 rogue . i am wondering if i can use the curt wire kit C56033 with the draw-tite class 3 hitch # 75902? thanks
asked by: Jeff
Helpful Expert Reply:
For your 2015 Nissan Rogue, the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75902 is a confirmed fit. It will work very well for you and will install fairly easily. I've attached a video of this installation for you.
For your wiring, the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56033 is a confirmed fit. This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side interior trim panels in your rear cargo area. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery. I've attached an article to help you with running this power wire that helps to avoid overloading your factory electrical system. I've attached a video of this installation as well.
For a ball mount, I recommend the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black # BWTS10037B. This ball mount is adjustable to allow you to tow many trailers level. It has two hitch ball options, a 2 inch and a 2-5/16 inch to fit with most standard trailer couplers. This ball mount also has a unique stowable feature to give you a clean look when not in use and protect you from hitting your shins while loading and unloading when not in use. I recommend using a hitch lock like # e98882 to secure your investment.
Products Referenced in This Question
B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 2 Inch Ball
- 2-5/16 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Matte Black
- Drop - 5 Inch
- Rise - 5 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- B and W
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
etrailer Trailer Hitch Receiver Lock for 2" Hitch - Flush - 2-5/8" Span - Stainless Steel
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Alike
- Stainless Steel
- Fits 2 Inch Hitch
- Flush Pin
- 2-5/8 Inch Span
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Availability Of Curt Trailer Hitch For A 2024 Hyundai Santa Fe Hybrid
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: How to Add a 7-Way Connector for a 2023 Ford Bronco w/out the Factory Towing Package
- Q&A: Recommended Hitch for a 2024 Honda CR-V Hybrid Sport
- Q&A: Wiring Harness Options For A 2023 Kia Telluride
- Q&A: 7-Way For 2023 Ford F-150 That Has 4-Way Connector
- Article: How to Install a Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Determining Trailer Tongue Weight
- Article: How to Measure a Trailer Axle
- Q&A: Will the etrailer Trailer Hitch e98840 for 2017 Acura MDX Work for Boat Towing
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited