Replacement Bolt-On Trailer Step Outrigger Mounting Brackets

Question

Question:

We have a 2011 Couger 5th wheel and need to replace the outriggers that the steps a mounted on. Will the items listed fit. I noticed they are 2 inches longer and the present ones are welded in the back. How are these mounted?

asked by: David P

1

Helpful Expert Reply:

We do offer RV step outrigger mounting brackets, the Lippert # LC301704. These bolt on using included hardware. Part # LC301704 also fits only multi-step assemblies.

expert reply by: Adam R

1

Answer 1

Hey Frankie, The bracket for the Timbren Suspension Enhancement System #TFR250SDJ has a locknut in it that makes it feel like the bolt (part #4) is fully tightened when it's not. Their techs have stated that you just have to push past this point…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

From the picture you provided it appears you have the Lippert Kwikee 42 Series Double Tread Electric Step #LC372779. Unfortunately, we don't have replacement parts for the steps. Before purchasing make sure the mounting bolt pattern matches.…

view full answer...

Answer 5

We don't have an install picture but what I can do is describe it. The portion of the #LC301704 with the round holes mounts to the bottom of the frame on your trailer with nuts and bolts or welding. They would need to be spaced at the width of…

view full answer...

Answer 6

We can definitely narrow it down, but it is difficult to say with 100% certainty what the weight rating is based on those specs. Generally a 6 lug hub will be on axles rated between 5,200 and 6,000 lbs. There are some 3,500 lb axles that use a 6 lug…

view full answer...

Answer 7

We don't have an install video but what I can do is describe it. The portion of the #LC301704 with the round holes mounts to the bottom of the frame on your trailer with nuts and bolts or welding. They would need to be spaced at the width of your…

view full answer...

Answer 8

Kenny, those bolts for the B&W Companion 5th Wheel Trailer Hitch #BWRVK3500-5W should be torqued to 40 ft. lbs. Also, the pivot arms would need to be torqued to 80 ft. lbs, the draw down bolt should be tighten to 60 ft.lbs and the arms should be…

view full answer...

Answer 9

I have a solution to help you install your Lippert Manual Double Step #LC432682. While your gusset plate idea would work, if you are concerned with stability I recommend using the Lippert Outriggers #LC301704 to help you mount the steps to your…

view full answer...

Answer 10

The RV steps do get a bit wider as you add more steps to them. The closest option we have is the Alumi Tread part #LC432698 that you referenced which would be 28 inches wide. For basically all RV applications you can still install the steps but…

view full answer...

Replacement Bolt-On Trailer Step Outrigger Mounting Brackets

Product Page this Question was Asked From

Continue Researching