Can Integrated Brake Controller of 2015 Chevy Silverado by Bypassed for Install of P3
Question:
I have a 2015 Silverado 2500HD with the integrated brake controller. Can this be disabled and a Tekonsha P3 be installed. If so can you e-mail me the instructions. Also how long can the breakaway switch be activated for trouble shooting power to the brakes before damage occurs?
asked by: JIM S
Helpful Expert Reply:
Installing the P3 brake controller # 90195 on your 2015 Chevy Silverado 2500 with factory integrated controller will actually be very simple.
What you will do is use harness # 3016 which plugs into a port on the truck already. But you will need to remove the blue wire from the end that plugs into the truck. You will then take a length of wire, # 10-1-1, and connect it to the blue wire you removed from the connector.
Route the blue wire through the firewall, under the truck, and to the trailer connector. Avoid hot or moving parts like suspension and exhaust.
At the trailer connector, remove the wire in the 7 oclock position (looking at the back of the connector where the wires attach). Tape it up and stow it out of the way. Then attach the wire you ran to the 7 oclock position. This will bypass the factory controller without causing any dash lights/error messages to appear.
The 10-1-1 wire is sold in lengths of 1 foot. So if you needed 20 feet you would put 20 in the quantity box.
Products Referenced in This Question
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Product Page this Question was Asked From
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Does the Tekonsha P3 Trailer Brake Controller Turn Off or Stay On All the Time
- Q&A: Parts Needed To Install A Brake Controller On A 2023 Freightliner Cascadia
- Q&A: How Does Brake Controller Install on Freightliner S2RV Chassis
- Q&A: Suspension Enhancement Recommendation for 2019 Toyota RAV4
- Q&A: Parts Needed to Add 7-Way & Brake Controller on 2023 Kia Sportage
- Q&A: Replacement Lid and Lift Arm for Dometic 810263