Recommended Triple Axle Hardware Kit For Equa-Flex Equalizer System

Question

Question:

Need support to determine which hardware replacement kit is correct for a tri axel with Lippert Equaflex Trailaire with greasable pivot for 7000#axels.

asked by: James F

1

Helpful Expert Reply:

The Equa-Flex Cushioned Equalizers for Triple 7K axles is # LC279689. For your hardware replacement kit, I recommend the Never Fail Triple Axle Suspension Upgrade Hardware Kit for Double Eye Springs # LC281288 to work well with the equalizers.

expert reply by: Jason S

1

Answer 1

As the Dexter #K71-657-00 is rated for 35 inches of axle spacing, I do not suggest using it. However, we do have a MORryde system that will work with your spacing. The MORryde Shock Absorbing Suspension Equalizers for Triple Axle Trailers w/ 33"…

view full answer...

Answer 2

For your 2017 Keystone Raptor 398TS, I recommend checking out the: -MORryde Shock Absorbing Suspension Equalizers for Triple Axle Trailers w/ 33" Wheelbase #MR59ZR. These equalizers are designed to work with triple axle trailers with a 33"…

view full answer...

Answer 3

Thanks for the pictures! For your 2021 Vortex 5th wheel with triple 7,000 lbs axles the best way to upgrade your equalizers will be to use the Lippert Center Point item #LC1565401. This system will absorb road shock and reduce chucking. The Center…

view full answer...

Answer 4

The widest upgraded equalizer we have for trailer suspension is the Equa-Flex part #LC314336 which is 14-5/8 inches from bolt center to bolt center. This is a cushioned kit that is designed for use with 5,200 lb trailer axles which most likely would…

view full answer...

Answer 5

Sorry to hear about your troubles. Yes, the Equa-Flex Cushioned Equalizers - Double Eye Springs - Triple Axle - 5K to 8K item #LC279689 referenced in your picture is the best option for your Keystone Raptor 3812TS. If you are getting a complete…

view full answer...

Answer 6

Leaf spring length also plays a factor in axle spacing which may be why yours don't seem to match what you've found but since you have a triple axle trailer with 7k axles the correct kit you'd need is the part #LC279689.

view full answer...

Answer 7

There are trailers that leave the factory with different axle spacing, so I wouldn't worry too much about the difference. To determine the correct replacement equalizer I recommend measuring the distance between the horizontal mounting holes in…

view full answer...

Answer 8

For your triple axle on your 4200 Cyclone toy hauler, I recommend the E-Z Flex Triple Axle Suspension Kit with 7-3/4" Equalizers #K71-657-00. This system includes the wet bolts, metal bushings, and shackle straps. This system is also available…

view full answer...

Answer 9

There is an upgrade kit that will work for your Keystone Carbon's Equa-Flex Cushioned Equalizers - Triple Axle #LC279689. Even though Lippert does not have a kit for the triple-axle Equa-Flex for some reason, MORryde does have a heavy-duty kit…

view full answer...

Answer 10

The MORryde Shock Absorbing Equalizers #MR59ZR you were looking at were designed for 33" axle spacing but will likely still work just fine with your 33-1/2" axle spacing. You can confirm this by measuring the distance between the horizontal…

view full answer...

Answer 11

Based on the 12,400-lb base weight of your 2016 Reflections 357BHS you should have the Equa-Flex Cushioned Equalizer #LC279688 which works with 6K to 8K axles. The wet bolt to use is part #LC126238; you will need 7 for each side of the trailer, so 14…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Recommended Triple Axle Hardware Kit For Equa-Flex Equalizer System

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching