Recommended Windshield Cover For Ford E-350 Chassis Of 2017 Thor Motor Coach

Question

Question:

We have a Thor Motor Coach Four Winds 31W 2017. Witch windshield cover will fit on our class c motorhome. Its on a Ford cab

asked by: Nancy

0

Expert Reply:

For your 2017 Thor Four Winds Motorhome, I recommend the Adco Deluxe Windshield Cover for Class C Motorhome - Vinyl - White # 290-2507. This covers the windshield and the side windows of the cab which also provides privacy.

expert reply by: Jason S

0

Answer 1

Yes, since the 6 bolt batteries of your travel trailer are wired so that they output in 12 volts the Redarc Portable Solar Panel with Solar Charge Controller #RED75VR would work to charge them.

view full answer...

Answer 2

I spoke with my contact at Camco regarding your RV Power Defender Circuit Analyzer #CAM55312. He said that if the blue surge protector light is no longer illuminating on your unit then it has experienced a surge episode (and protected your RV!). This…

view full answer...

Answer 3

Yes, the Camco RV Power Defender Voltage Protector part #CAM55301 is compatible with a 2019 Winnebago Minnie Winnie Plus. I spoke with Camco and they stated the Camco RV Power Defender Voltage Protector is not UL Certified but is CSA Certified.

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 7

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 8

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 9

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 10

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 11

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 12

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...