Needing a Replacement End Cap for a Swagman Bike Rack

Question

Question:

The end cap on our swagman rack fell of. I am sending a picture of the post on the rack it goes in plus the whole rack. Do you have this part?

asked by: Todd L

0

Expert Reply:

We carry three different end caps for Swagman bike racks. So depending on what model bike rack you have, one of the three will work.

Here is the list of three caps that we carry:

Replacement End Cap for Swagman Semi and G10 Bike Carriers, # S1015.

Replacement End Cap for Swagman XC and XTC Series Bike Carriers, # P196.

Replacement End Cap for Swagman 2+2 Bike Rack, # SP472.

expert reply by: Jared P

0

Claudio B.

3/28/2020

I still dont have the right end cap. Put endcap dimensions in the description chrissakes.

Reply

Chris R.

3/30/2020

If you can tell me what model rack you have I'd be happy to track down the right cap. Since these are specific replacement parts designed to fit particular carriers, dimensions aren't always listed. Is there a specific cap you're looking at?

Reply

Claudio B.

3/21/2020

E-trailer folks: Include dimensions on the webpage, somewhere obvious. My bike rack has more than one endcap. I need the 1 - 13/16 endcap for the large bottom square tube on the Swagman G10 I suspect.

Reply

Chris R.

3/23/2020

For that larger square tube on the bottom of the Swagman G10, the Replacement Endcap # S1015 is the right part. If you ever need the smaller caps that attach at the end of the horizontal support bars (the bars with the wheel cradles) you would use part # P196.

Helpful Links

Accessories-and-Parts/Swagman/P196.html

Accessories-and-Parts/Swagman/S1015.html

Reply

Answer 1

Part #P186 is the current replacement part number for the Replacement Ratcheting Hook Set that was formerly part P188. The end cap part number remains #P196.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 5

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 8

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack…

view full answer...

Answer 9

I have a solution for you. Here at Etrailer, we strongly discourage using wheel-mounted bike racks like the Kuat NV 2.0 #NV22B for bikes with fenders. Mounting wheels with fenders can cause the fenders to crack or become damaged, especially with…

view full answer...

Answer 10

The RockyMounts MonoRail bike rack you'd looked at, part #RKY10004 is a great bike rack, but it wouldn't work well with bikes that have fenders like your Aventon Aventure Fat tire ebikes. The front fender would prevent the bike retaining hook…

view full answer...

Answer 11

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

view full answer...

Answer 12

At the rear of a trailer or RV the ride quality is very rough when compared to the ride quality at the rear of a passenger vehicle. Reason being the suspension isn't as sophisticated and there is a longer distance between the rear axle and the…

view full answer...

Needing a Replacement End Cap for a Swagman Bike Rack

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching