bing tracking image
Q & A Icon

How to Pick Out Roof Vent Lid for 2006 Keystone Cougar M-276 EFS  

Question:

I am looking for two replacement parts for our 2006 Keystone Cougar M-276 EFS: 1 Plastic Covers for Roof Vents 2 Side Wheel Trim plastic wheel fenders Both of these have cracked. Thank you.

0

Expert Reply:

We probably have the correct roof vent you are looking for, but the trim pieces you are looking for aren't going to be something we have. I looked up pictures of your trailer and the fender style that's on the trailer isn't something we carry.

The best way to find the correct replacement vent cover for your cargo trailer is to measure the vent. Most standard vents are 14-1/4 by 14-1/4 inches wide, 14 x 14 inches wide or 13 x 14 inches wide. Next if the manufacturer name is on the vent that will help. Finally, you will need to look closely at the hinged portion of the vent.

If there is a rolled metal hinge attached to the vent cover like on the Ventline Replacement Smoke Dome Assembly, part # BV0554-03. Then that is most likely the correct vent for your trailer as long as the measurement matches. There are also vent covers with plastic snap-in style hinges and different raising and lowering arm styles.

Basically the easiest way to select the correct replacement cover is to remove the existing cover and match the hinge and lift bracket to the photos on our site along with the dimensions. A link to all of the replacement vent covers is provided to match up with your cover.

expert reply by:
0
Jameson C
click to enlarge

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>