New Trailer Tires for a 1998 Coleman Mesa

Question

Question:

Hi, I am looking at purchasing a like new 1998 Coleman Mesa with original can u believe tires used little B78-13ST. I would like to replace all 3 including the white steel rims, the rims have a circle type pattern. Any advice including load range I believe they are C but not certain.

asked by: BRIAN P

0

Expert Reply:

B78-13ST tires can be replaced with size 175/80-13 tires. I recommend going with radial tires, which are ideal for towing trailers. These tires come in load range C (1,360 lbs at 50 psi) and load range D (1,600 lbs at 65 psi). Your tire load range should match or exceed your axle capacity. My research indicated that an unloaded 1998 Mesa with the standard manufacturer equipment weighs approximately 2,000 lbs, so while a lighter trailer load would let you get by with load range C tires, just to be safe, I recommend going with load range D tires, which would be more than capable of transporting your trailer.

For a load range D tire, I recommend our Karrier ST175/80R13 Radial Trailer Tire with 13" White Wheel, # AM31985, which also offers the steel spoke style. This wheel/tire combo includes a rust-resistant e-coat, computer-generated tread design for superior traction, and a 2-year warranty.

If you do decide to go with load range C tires, the Provider ST175/80R13 Radial Trailer Tire w/ 13" White Wheel, # TA43RR offers the steel mod wheel style you mention. It also offers a rust-resistant e-coat, improved torque retention technology to help secure the wheel, and a 2-year Platinum Plus Warranty with Roadside Assistance.

If you are interested in going with a different style and upgrading to aluminum wheels, I recommend the Karrier ST175/80R13 Radial Trailer Tire w/ 13" Aluminum Wheel - 5 on 4-1/2 - load range D, # AM32001HWTB.

expert reply by: Amber S

0

Answer 1

The biggest clue for determining what bearings you need came from the last number you listed. Thank you for that! You have basically the part #8-258BTUC1 hub and the correct bearings would be the kit part #DL21792 that comes with the correct…

view full answer...

Answer 2

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…

view full answer...

Answer 3

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 4

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 5

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 6

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 7

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 8

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 12

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

New Trailer Tires for a 1998 Coleman Mesa

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching