Does Rhino-Rack Roof Rack for 2017 Jeep Grand Cherokee Allow Panoramic Roof to Open

Question

Question:

Does this rack provide enough clearance to open the dual-pane panoramic sunroof when installed?

asked by: Allen S

0

Expert Reply:

The roof racks we offer for your 2017 Jeep Grand Cherokee like the Rhino-Rack RVP part # RRRVP27 all require you to keep the panoramic sunroofs closed at all times. The manufacturer doesn't test them for use with the panoramic roof open as there are many more variables. There is physically the clearance but it is not recommended.

expert reply by: Jameson C

0

Answer 1

We have just what you are looking for from a roof rack for your 2020 Jeep Grand Cherokee that has flush black rails with a chrome center section with the Rhino Rack RVP Roof Rack #RRRVP27. This gives you aero shaped bars that sit flush with the feet…

view full answer...

Answer 2

Moon roofs that open into a cavity in the roof would not be a problem with a roof rack such as #RRRVP27 for the 2018 Jeep Grand Cherokee. But anything that opens upward can potentially make contact with the roof rack itself or something being carried…

view full answer...

Answer 3

The Rhino Rack Aero Bar Roof Rack #RRRVP27 that you referenced in your question is confirmed to fit your 2017 Jeep Grand Cherokee as long as it features the E Group Package with flush mounted rails that run front to back. The E-Group rails have a…

view full answer...

Answer 4

The Yakima Jetsream Crossbar System is an excellent option for a 2016 Jeep Grand Cherokee. If you have black and chrome side rails then you'll need part #Y00425, part #Y53TR, and part #Y00244. If you have all black side rails or a bare roof then…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 9

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 10

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll…

view full answer...

Answer 11

Thanks for all the details! We definitely have a way to get a cargo basket and an awning installed on your 2024 Toyota Highlander, although the aftermarket roof rack systems will use a clamping system with your door jambs instead of mounting via…

view full answer...

Answer 12

If you are using the Rhino-Rack Aero Bar Crossbars like #RRVA137B they have a dimension of 54" long x 3-1/8" wide x 1-3/16" tall which works for Thule boxes that use the PowerClick quick-release clamps, including the Thule Vector…

view full answer...