Class III 2 Inch Curt Trailer Hitch Receiver to Fit a 2016 Chrysler 300C
Question:
Does the Curt 2inch system fit the 2016 Chrysler 300C?
asked by: Landon
Helpful Expert Reply:
We actually have two Class III, 2 inch trailer hitch receivers from Curt that fit the 2016 Chrysler 300C. Curt # C13236 and # C13093 will work for you. I've linked a video of the # C13093 installed on a 2012 300C for you.
If you're going to be towing a trailer with the 300C you'll need a wiring harness for the trailer's lights. The Tekonsha # 118658 is confirmed to fit. It plugs in behind both tail lights then has the hot wire ran to the battery.
You'll also need a ball mount and hitch ball. I've attached a link of our selection of ball mounts for a 2 inch hitch receiver as well as an article to help you determine the correct rise or drop you may need. Once you choose a ball mount you can then choose a hitch ball to fit it.
One way to make choosing a ball mount easier is to go with an adjustable ball mount like the B&W Tow & Stow # BWTS10038B. It features the ability to be flipped under the hitch when not using it and will provide up to 5-1/2 inches of rise or 5 inches of drop.
For a pin and clip to fit you can use # PC3 or if you'd like to have a locking pin you can use # BX8858.
I've also included links to some articles on towing that you might find helpful.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Matte Black
- Drop - 5 Inch
- Rise - 5 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class IV
- B and W
more information >
Blue Ox Trailer Hitch Receiver Lock for 2" Hitches
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Unique
- Fits 2 Inch Hitch
- Flush Pin
- 2-3/4 Inch Span
- Blue Ox
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Recommended Trailer Hitch with Best Ground Clearance for 2017 Dodge Challenger
- Q&A: Installation of Curt Trailer Hitch Receiver on a 2017 Dodge Challenger SXT Plus
- Q&A: Recommended Ball Mount For 2014 Dodge Challenger To Tow Trailer With 16" Coupler Height
- Q&A: Will the Trailer Hitch for a 2019 Dodge Challenger Work with Aftermarket Exhaust
- Q&A: Which Hitch and Bike Rack Should I Get To Carry E-Bikes On My 2014 Dodge Challenger?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Q&A: What Is The Purpose Of The Modulite In Trailer Wiring Harness For 2013 Chrysler Town and Country
- Article: My Trailer Hitch Doesn't Fit
- Article: Rooftop Cargo Carriers
- Article: Roof Rack Information
- Article: Flat Towing Package for 2011 Chevrolet HHR