Will Curt Trailer Hitch # C15300 Fit a 1997 Ford F-350 Without Removing the Spare Tire
Question:
Im interested in the curt magnum V trailer hitch part number referenced above for my 1997 F350 4x4 same or similar to the 94-96 bodystyle trucks, NOT the newer super duty trucks. I would like to know if this hitch can be used with the ford factory under bed spare tire carrier 235/85r16 spare. Thanks.
asked by: Ryan B
Expert Reply:
According to Curt, if you install trailer hitch # C15300 on your 1997 Ford F-350, the spare tire will need to be temporarily lowered for hitch installation, but it does not have to be removed. The hitch is designed to fit the larger 37-1/4 inch frames. While you do not have to remove the spare tire, it may need to be repositioned once the hitch is in place. I have included a link to the installation details for reference.
The recommended ball mount for this hitch is # BWBMHD30010 and you can use pin and clip # PC3. For a ball, you can use # A-90 (2 inch diameter) or # 19286 (2-5/16 inch diameter). If you need trailer wiring, you can use T-One Vehicle Wiring Harness with 4 Pole Trailer Connector, # 118316. I have included a link to the installation details and a video showing a typical installation of this harness for you to view.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
B&W Heavy-Duty Ball Mount - 1" Rise, 2" Drop - 8-1/2" Long - 16,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 16000 lbs GTW
- Class IV
- B and W
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class V
- 2400 lbs TW
- 16000 lbs GTW
- 17000 lbs WD GTW
- 2 Inch Hitch
- 2400 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Draw-Tite Max-E-Loader Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Bolt Hole Spacing for Draw-Tite Class V Trailer Hitch Receiver DT45502
- Q&A: Distance Between Mounting Holes Left to Right of Curt Hitch # C15300
- Q&A: Bolt Hole Location on Curt Class V Trailer Hitch Receiver # C15300 for 1993 Ford F-150
- Q&A: Will Curt # C15300 Clear Flatbed on 1997 Ford F350
- Q&A: Distance Between Vertical Mounting Flanges of Curt Hitch C15300
- Q&A: Is There An Aftermarket Puck System Available For A 1995 Ford F-350
- Q&A: Distance Between Mounting Holes On B&W Heavy-Duty Trailer Hitch Receiver For 1996 Ford F-150
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Measure for Trailer Hitch Drop
- Article: The 5 Best Trailer Drop Hitches You Can Buy