What Are The Replacement Bearings For My 2,800 Lb. EZ Loader Trailer Axle

Question

Question:

ez loader bearing for 1zeaaamc5ya008576 thanks

asked by: John

0

Expert Reply:

Thank you for the VIN. I called my contact at EZ Loaders Trailers and they informed me that this trailer uses the L44649 and L68149 bearings. Therefore, I recommend replace you existing bearing with our Bearing Kit for 84 Spindle part # BK2-100.

If you just want to replace just the bearings, you will want part # L44649 and part # L68149. When replacing your new bearing, I recommend using the LubriMatic LMX Industrial Strength Grease part # L11390. I have attached a video demonstration that will show you how to change and repack your new bearing for you.

expert reply by: Conner L

0

Answer 1

The bearings you would need are inner bearing #LM67048, outer bearing #L44649 with a #10-42 seal. We don't have this as a kit but you can order each individually.

view full answer...

Answer 2

The grease seal part number #168255TB that you referenced matches the dimensions of the grease seal you are looking for so it would work well for you.

view full answer...

Answer 3

Hey Frankie, The bracket for the Timbren Suspension Enhancement System #TFR250SDJ has a locknut in it that makes it feel like the bolt (part #4) is fully tightened when it's not. Their techs have stated that you just have to push past this point…

view full answer...

Answer 4

For a 29.5" doorway with a 36.5" stair height I recommend the MORryde StepAbove RV Steps for 27-3/4" to 30-1/4" Wide Doorways - 4 Steps item #MR28RR. These steps are for entryways with a doorway width (from inside flange to inside…

view full answer...

Answer 5

Hey Beatrice, To find the right fit for your trailer's suspension you'll need to take a quick measurement of your current shackle straps. You'll need to measure from the center of one bolt hole to the center of the other bolt hole. The…

view full answer...

Answer 6

Hey Dave, the MORryde upgraded shackle kit part #MR76ZR that you referenced is compatible with your 2020 Grand Design 2670MK and the Lippert Road Armor equalizers.

view full answer...

Answer 7

The MORryde StepAbove Fold-Down Steps for 27-3/4" to 30-1/4" RV Door Frames - 9" Drop Item #MR78RR will fit your 30" door width with 36" entry height. There isn't a strut assist for this size but you won't have any…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

What Are The Replacement Bearings For My 2,800 Lb. EZ Loader Trailer Axle

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching