Recommended Bike Rack And Shank For Clearance on 2014 Honda Odyssey
Question:
The Receiver Mount for Advantage SportsRack V-Rack 2 Bike Carrier - 2" Hitches # HE6007 has a measurement of 6-1/4 inches from hitch pin hole to tube end. This will not be long enough to even clear your bumper with some of the hitches available for your 2014 Honda Odyssey as you can see in the attached video. The Curt Clamp-On 3 Bike Rack for 2" Ball Mounts - Towing # C18013 can be used with Ball Mount 3/4" Rise or 2" Drop, Extra Long # D-26 or the Curt Hitch Extender for 2" Trailer Hitches - 14" Long # C45795. You may want to consider using a rack like the Rola TX-103 3-Bike Rack for 1-1/4" and 2" Hitches - Tilting # 59403 that will give you clearance and also a tilting function for easier access to your cargo area. This carrier even has the integrated cable lock for securing your bikes to the rack. With a hanging rack, you may want to consider the Swagman Deluxe Bike Frame Adapter Bar for Women's, Children's, and Alternative Frame Bikes # 64005 for any bikes without a top frame tube.
asked by: John
Expert Reply:
The Receiver Mount for Advantage SportsRack V-Rack 2 Bike Carrier - 2" Hitches # HE6007 has a measurement of 6-1/4 inches from hitch pin hole to tube end. This will not be long enough to even clear your bumper with some of the hitches available for your 2014 Honda Odyssey as you can see in the attached video.
The Curt Clamp-On 3 Bike Rack for 2" Ball Mounts - Towing # C18013 can be used with Ball Mount 3/4" Rise or 2" Drop, Extra Long # D-26 or the Curt Hitch Extender for 2" Trailer Hitches - 14" Long # C45795.
With a hanging rack, you may want to consider the Swagman Deluxe Bike Frame Adapter Bar for Women's, Children's, and Alternative Frame Bikes # 64005 for any bikes without a top frame tube.
Products Referenced in This Question
Swagman Bike Frame Adapter Bar - Small - 22-1/2" - 30" - 35 lbs
- Accessories and Parts
- Hitch Bike Racks
- Spare Tire Bike Racks
- Trunk Bike Racks
- Adapter Bar
- Frame
- 24-3/8 - 33-3/4 Inch Long
- Swagman
more information >
Curt Clamp-On Bike Rack for 3 Bikes - 2" Ball Mounts
- Hitch Bike Racks
- Hanging Rack
- Towing Rack
- Frame Mount
- Locks Not Included
- 3 Bikes
- Class 3
- Fits 2 Inch Hitch
- CURT
more information >
Curt Hitch Extender for 2" Hitch Receivers - 8" Long
- Hitch Adapters
- Hitch Extender
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- Trailers
- 8 Inch Extension
- Fits 2 Inch Hitch
- 3500 lbs
- CURT
more information >
Curt Hitch Extender for 2" Trailer Hitches - 14" Long
- Hitch Adapters
- Hitch Extender
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- Trailers
- 14 Inch Extension
- Fits 2 Inch Hitch
- 3500 lbs
- CURT
more information >
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Long Shank
- CURT
more information >
Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
- Hitch Adapters
- Hitch Reducer
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- No Extension
- Fits 2 Inch Hitch
- 2 Inch to 1-1/4 Inch
- Brophy
more information >
Product Page this Question was Asked From
Receiver Mount for Advantage SportsRack V-Rack 2 Bike Carrier - 2" Hitches
- Accessories and Parts
- Hitch Bike Racks
- Shanks and Adapters
- Receiver Mount
- VRack
- Heininger Holdings
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Is Trimming Required to Install the etrailer Hitch # e98902 on My 2021 Mazda CX-5?
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Article: Trailer Wiring Diagrams
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
- Article: Best Bike Racks for Electric Bikes
- Q&A: Does HBA-CAM Adapter Module for Hydrastar Electric Over Hydraulic Brake Actuators have 2 or 4 Wires
- Article: Trailer Maintenance Schedule
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
John
7/14/2017
The Receiver Mount for Advantage SportsRack V-Rack 2 Bike Carrier - 2" Hitches # HE6007 has a measurement of 6-1/4 inches from hitch pin hole to tube end. This will not be long enough to even clear your bumper with some of the hitches available for your 2014 Honda Odyssey as you can see in the attached video. The Curt Clamp-On 3 Bike Rack for 2" Ball Mounts - Towing # C18013 can be used with Ball Mount 3/4" Rise or 2" Drop, Extra Long # D-26 or the MaxxTow Hitch Extender for 2" Trailer Hitches - 12" Long # MT70024. You may want to consider using a rack like the Rola TX-103 3-Bike Rack for 1-1/4" and 2" Hitches - Tilting # 59403 that will give you clearance and also a tilting function for easier access to your cargo area. This carrier even has the integrated cable lock for securing your bikes to the rack. With a hanging rack, you may want to consider the Swagman Deluxe Bike Frame Adapter Bar for Women's, Children's, and Alternative Frame Bikes # 64005 for any bikes without a top frame tube.