Which Draw-Tite Trailer Hitch Receiver Fits a 2013 Ford Edge SEL with Dual Exhaust
Question:
I would like to make sure the 2inch Draw-Tite platform #75728 will fit a 2013 Ford Edge SEL all wheel drive with dual exhaust?
asked by: Paul S
Helpful Expert Reply:
The Draw-Tite Trailer Hitch Receiver # 75728 is for the Ford Edge Sport and will not fit your 2013 Ford Edge SEL.
On you SEL model instead you need Draw-Tite # 75992. It is designed to fit models with dual exhaust. I've attached a picture of the hitch on an SEL with dual exhaust that I found in the install details. I've also linked the install details and an install video for you.
If you're going to be towing with your Edge the wiring harness to fit is # 118515. It plugs into the connectors behind both tail lights. Then you'll run a hot lead from the harness to the Edge's battery trough the fuse holder. Everything you need is included.
You'll also need a ball mount and hitch ball. I've attached a link of our selection of ball mounts for a 2 inch hitch receiver as well as an article to help you determine the correct rise or drop you may need. Once you choose a ball mount you can then choose a hitch ball to fit it.
One way to make choosing a ball mount easier is to go with an adjustable ball mount like the B&W Tow & Stow # BWTS10038B. It features the ability to be flipped under the hitch when not using it and will provide up to 5-1/2 inches of rise or 5 inches of drop.
For a pin and clip to fit you can use # PC3 or if you'd like to have a locking pin you can use # BX8858.
I've also included links to some articles on towing that you might find helpful.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 400 lbs TW
- 4000 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 400 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Matte Black
- Drop - 5 Inch
- Rise - 5 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class IV
- B and W
more information >
Blue Ox Trailer Hitch Receiver Lock for 2" Hitches
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Unique
- Fits 2 Inch Hitch
- Flush Pin
- 2-3/4 Inch Span
- Blue Ox
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Max-E-Loader Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 525 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Draw-Tite Max-E-Loader Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: Trailer Hitch Installation - 2012 Ford Edge - Draw-Tite
- Video: Best 2012 Ford Edge Trailer Wiring Options
- Video: Trailer Hitch Installation - 2012 Ford Edge - Curt C13067
- Video: Trailer Wiring Harness Installation - 2012 Ford Edge
- Video: Trailer Wiring Harness Installation - 2012 Ford Edge 118515
- Video: etrailer Class III Trailer Hitch Installation - 2012 Ford Edge
- Video: Best 2012 Ford Edge Trailer Hitch Options
- Q&A: Hitch with Best Ground Clearance for 2013 Ford Edge Sport
- Shop: Suspension Enhancement
- Shop: Trailer Wiring
- Q&A: Towing Capacity for the Draw-Tite Max-E-Loader Trailer Hitch Receiver # 75728
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: CIPA Universal Towing Mirror Options for a 2013 Ford Edge
- Shop: Performance Chip Tuners
- Shop: Bug Shield
- Shop: Towing Mirrors
- Shop: Vehicle Air Mattress
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Trailer Connector Adapter - 4-Way to 7-Way RV and 4-Way Flat
- Shop: CIPA Universal Towing Mirror - Clip On - Qty 1
- Article: Best Bike Racks for Electric Bikes
- Q&A: Towing Capacity of 2013 Ford Edge 3.5L AWD Without Tow Package
- Q&A: Availability of Trailer Hitch for 2013 Ford Edge Sport