Replacement Slider Awning For Heartland Northtrail 22BKS Travel Trailer

Question

Question:

my slide out box measures 94.5inch outside flange to outside flange so what size awning am i orxering ? and i have a bead rail built into the drip rail already can i use that. TT is a Heartland Northtrail 22BKS. Thanks

asked by: Steve

0

Expert Reply:

Most awnings have the drip rail sitting above the bead rail. They are normally not built-in as you mentioned. We do not have an awning that is the length you mentioned. We do have awning kits that would work with your box width. If you want to send me a photo of the bead/drip rail, I can do some more research to see if we have an awning that will work with you.

When you order an awning you need at least 2-1/2 inches on each side of the slide out box. For your 94.5 inch wide box you will need an awning that is 8-1/2 ft like part # LCV000163289 for a white awning with white hardware.

If you want a Black awning with Black hardware you can use part # LCV000168107.

expert reply by: Jeffrey L

0

Pierre L.

1/24/2020

I own a 22rbk north trail from heartland. I need to get a replacement fabric for my electric awning. I’d like an acrylic one, it’s 13 feet, what do you suggest? Thanks

Reply

Jason S.

1/27/2020

For your 13 foot awning, you can use the Solera Replacement Awning Fabric for 13' Roller Assemblies - Black Fade # LCV000334364. There are many color options available so I've linked the page to all your options. These awnings are a Heavy-duty, 13.5-oz vinyl fabric like you are seeking.

Helpful Links

dept-pg-Accessories_and_Parts-sf-RV_Awnings-pt-Fabric-tw-13_Feet_Wide.aspx

tv-review-solera-replacement-awning-fabric-lcv000334429.aspx

Reply

Answer 1

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 2

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 3

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 4

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 5

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 6

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 7

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 8

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 9

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 12

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to stress…

view full answer...

Replacement Slider Awning For Heartland Northtrail 22BKS Travel Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching