Recommended Thick Ramp Door Bumper for Cargo Trailer

Question

Question:

I own a cargo trailer with ramp door and was wondering if they make thicker ramp door bumpers. I use this trailer for my ATV and the parking lots are not even so I am ding the gate. Tank you

asked by: Kevin

0

Expert Reply:

The thickest standard rubber trailer ramp door bumper we currently have available is # 37210715. This bumper has an outside diameter of 2-1/2 inches and a height/thickness of 1 inch.

We also have bumper strips like the Redline Pre-Drilled # D3-96. This particular strip is 96 inches long and 3 inches wide. They can be trimmed down to length as needed to fit your application.

I have attached video demonstrations on these products as well as a link that will take you to our available selection of ramp door bumpers.

expert reply by: Chris R

0

Answer 1

The Jensen LED 110V RV TV #JE2417 that you referenced draws 30 watts. We also have the Jensen LED 12V RV TV with DVD Player and AC/DC Adapters - 720P - 1 HDMI - 19" Screen Item #JTV1917DVDC that can run on 12V. This has a build in DVD player.…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Hi Kat, The rubber bumpers that we offer are all 96" in length but can come in different widths. Based on the dimensions you provided i your pictures the #D3-96 is going to be the best fit, but you will have to cut it down to size.

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

The bumper part #D3-96 that you referenced is our best option and could work for you but you will need to make some modifications. You would need to cut it down to the 84 inch length you need and would also need to drill new holes in it that line up…

view full answer...

Answer 10

Although we don't carry replacement parts for your Reliable brake actuator we do offer a good replacement, the Dexter #DX89FR would be an excellent replacement for your current actuator. You can see a product video for the #DX89FR hydraulic…

view full answer...