How Long Are Double-Eye Leaf Springs Rated for 3,500 lb Axles

Question

Question:

Hey there I am looking double eye leaf springs for 3500-lb Trailer Axles what lengths are there

asked by: Nick

1

Helpful Expert Reply:

The double-eye leaf spring suspension systems we have for 3,500 lb trailer axles measure 27 inches # e97SR, 25-1/8 inches # e54SR, and 23-1/8 inches # e59SR.

expert reply by: Jon G

1

Answer 1

You very well could use wheel studs instead of bolts by installing screw-in studs like the 1/2" x 2" Redline #25-53 or #25-51, or the 9/16" x 3" Redline #25-11. Just be sure that the stud is the correct size, the…

view full answer...

Answer 2

Thanks for all the details Jason! To get a Blue Ox tow bar to fit with the shackles on your 2021 Jeep Wrangler Sport you'll need either the 7/8" #BX88357 or 1" #BX88358 Adapters, but just be sure to check with the…

view full answer...

Answer 3

I don't have a wiring diagram, but I'd be happy to explain it for you. In order for the reverse solenoid on a Hydraulic Brake Coupler like #DM62VR to function, one of the two wires leading from it needs to be connected to the wire…

view full answer...

Answer 4

You are indeed right to think this way. When picking out the appropriate leaf springs for your custom built trailer you will want to choose them based on what the actual loaded weight of the trailer will be. Just make sure that the leaf springs…

view full answer...

Answer 5

The first and easiest thing you should check is that the trailer is being towed level. If the trailer is nose high or low that can cause the equalizers to not sit level. You will need to select the correct rise/drop ball mount so that the trailer…

view full answer...

Answer 6

To correctly measure a leaf spring, you'll want to jack the trailer up on jack stands so the axle is hanging freely, then measure directly across from the center of one spring eye to the other, as shown in the provided diagram. The height of the…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 9

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 10

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 11

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

view full answer...

Answer 12

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

How Long Are Double-Eye Leaf Springs Rated for 3,500 lb Axles

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching