Ball Mount, Balls, and Trailer Wiring Recommendations for a 2007 Volvo XC90 with Draw-Tite Hitch
Question:
Hello-based on the dimensions you list for my 07 Volvo XC90 V8 Sport, what would you recommend for a 2inch ball and the ball mount? I am tending towards the Draw-Tite receiver hitch Item # 75152 for my vehicle. I realize that there might be different products necessary for specific applications, but in general - what you would recommend for starters? I have no trailer right now, but would like to be able to tow a U-Haul type trailer as well as some boat trailers. Thanks!
asked by: Pete
Expert Reply:
For your 2007 Volvo XC90 and Draw-Tite trailer hitch # 75152 I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
Most rental trailers are going to require a 4-Way flat trailer connector. To add one to your XC90 you can use # 118411. I have included links to videos showing how the hitch and wiring install.
Some boat trailers might have a 5-Way flat connector on them. The 5th pin would be for an electric reverse lockout on a trailer that has surge brakes. In that case you would still install the above mentioned 4-Way but then add a 4- to 5-Way adapter # 20036.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Tow Ready 4 Pole to 5 Pole Trailer Wiring Adapter
- Trailer Wiring
- Wiring Adapters
- Single-Function Adapter
- 0 - 5 Feet Long
- 4 Flat
- Plug and Lead
- 5 Flat
- Tow Ready
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Choose the Right Trailer Hitch Class
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: How to Get a Ball Mount with 0 inches of Rise or Drop
- Q&A: Grease Seal Recommendation For 6,000 Lb Axle With Dexter Hub Assembly
- Article: My Trailer Hitch Doesn't Fit
- Q&A: How to Tell if you Have the Factory Towing Package 2018 Chevrolet Equinox
- Q&A: How to Determine If 2013 Chevy Equinox has Tow Package for Trailer Wiring
- Q&A: How To Install a 30 Amp Service on an Enclosed Cargo Trailer
- Q&A: Parts Needed and Wiring Methods for Adding 110 and 12 Volt Power and Accessories to a Trailer
- Article: Rooftop Cargo Carriers
- Q&A: Availability of Trailer Hitch for 1986 Ford Bronco II
- Article: Trailer Maintenance Schedule
- Article: Gooseneck to 5th Wheel Adapters