Ball Mount Recommendation for 2006 Honda Odyssey with Curt Hitch with 7 inches of Rise
Question:
Hello, i currently have a Curt 2inch class III hitch receiver C13068 on my 2006 Honda Odyssey. Im looking to pull a Kendon trailer which needs to be ideally attached at a height of 19-21inch using a 2inch ball mount. The center of the hitch is currently 11-12inch inches off the ground. Please recommend an appropriate an appropriate ball and ball mount to achieve a height of 19-21. Thank you.
asked by: Omar A
Expert Reply:
When we installed the Curt Hitch part # C13068 on a similar 2005 Honda Odyssey as yours we found that from the top of the hitch opening down to the ground measured 13 inches. That means that if you need a ball mount platform height at 19-21 inches you'd want a rise ball mount of around 7 inches. For that we have the part # 4283 which in the rise position provides 7 inches of rise.
For a 2 inch hitch ball you then would want the part # A-90, or for a 2-5/16 inch hitch ball part # 19286.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
Draw-Tite Ball Mount for 2" Hitch - 7" Rise, 8" Drop - 9-1/2" Long - 12,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Silver
- Drop - 8 Inch
- Rise - 7 Inch
- Fits 2 Inch Hitch
- 12000 lbs GTW
- Class IV
- Draw-Tite
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Q&A: Aero Bar Roof Rack that Fits 2022 Toyota Highlander
- Q&A: Will the etrailer Trailer Hitch e98840 for 2017 Acura MDX Work for Boat Towing
- Q&A: What to Do with the Extra Trim Added to the 2022 VW Tiguan, R-Line for Hitch Receiver Install
- Q&A: Recommended Trailer Hitch for 2017 Nissan Rogue
- Q&A: Does Tongue Weight Capacity Get Reduced if Carrying Bike Rack
- Q&A: Best Bike Rack For Transporting A Step-Thru Ebike On The Back Of A 2015 Toyota Prius
- Q&A: Brake Controller for 2019 Ford Edge With Factory Tow Package
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Frequently Asked Questions About Transmission Coolers
- Article: Trailer Wiring Diagrams
- Article: Best Bike Racks for Women's Bikes