Installation Tips for a Sealed, Uni-Lite Mini LED Side Marker Light # MCL11AKB
Question:
What size is the hole for the 2 grommets and what do you use to seal between the grommet and the base material 1/8 fiberglass in my application? I assume you place the grommet and push the light into the grommet, correct? Do you need a lubricant for setting the grommet or light?
asked by: Al
Expert Reply:
You would need need to drill a hole that is 11/16 of an inch in diameter to install this Sealed, Uni-Lite Mini LED Side Marker and Clearance Light, part # MCL11AKB.
If you wanted to use a gasket sealer you could use Loctite RTV 598 High-Performance Silicone Gasket Maker, part # LT37467.
You are correct, you would want to put the grommet in first and then push the light in through the front until it is seated all the way in.
If you found it difficult to install the light into the grommet and needed something as a lubricant, I would recommend using a liquid hand or dish soap.
Products Referenced in This Question
Loctite RTV 598 High-Performance Silicone Gasket Maker - Black - 2.7-Fl Oz Tube
- Lubricants Sealants Adhesives
- Sealant
- Gasket Maker
- 2.7 oz
- Loctite
more information >
Product Page this Question was Asked From
Uni-Lite LED Clearance and Side Marker Light w Grommet - Submersible - 2 Diodes - Amber Lens
- Trailer Lights
- Clearance Lights
- Rear Clearance
- Side Marker
- Round
- Recessed Mount
- Submersible Lights
- LED Light
- 3/4 Inch Diameter
- Amber
- Optronics
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: GloLight Uni-Lite Mini LED Clearance or Side Marker Light with Grommet - Round - Red Lens
- Shop: Uni-Lite LED Clearance and Side Marker Light w Grommet - Submersible - 2 Diodes - Amber Lens
- Shop: GloLight Uni-Lite Mini LED Clearance or Side Marker Light with Grommet - Round - Amber Lens
- Shop: GloLight Uni-Lite Mini LED Clearance or Side Marker Light with Grommet - Round - Amber Lens
- Shop: GloLight LED Trailer Clearance or Side Marker Light - Submersible - 6 Diodes - Round - Red Lens
- Video: Optronics Trailer Lights - Clearance Lights - MCL111RKPG Review
- Shop: GloLight Uni-Lite LED Clearance and Side Marker Light - Submersible - 2 Diodes - Round - Red Lens
- Search Results: marker light cover
- Video: Command LED Bullet Clearance or Side Marker Trailer Light with Grommet Installation
- Shop: "Junior" Locking Steel Flush Door Latch with Inside Release
- Q&A: Replacement Amber Clearance Light For Trailer with Existing 1 Inch Diameter Hole
- Q&A: What Hole Size Should Be Drilled to Install the # MCL11AKB MiniLED Round Clearance Light
- Q&A: What Size Hole is the Uni-Lite LED Side Marker Light # MCL11AKB Designed to Install In
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Search Results: 68149
- Video: Lippert Solera Slider Slide-Topper Review
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 25580
- Video: Choosing the Right Brake Controller
- Shop: Fifth Wheel Hitch
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Shop: Brake Controller
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase