Air Ride Pin Box Replacement for OEM Pin Box on a 2010 Keystone Raptor

Question

Question:

I have a 2010 Keystone Raptor, 3912LEV. The P/N of my current Lippert pin box is LCL207939. What air ride pin box will replace this?

asked by: Larry R

0

Expert Reply:

My contact at Lippert said that the 207939 pin box number on your 2010 Keystone Raptor is 1116. This means that the Trailair Air Ride 5th Wheel Pin Box Replacement for you is the part # LC155943 that you referenced.

expert reply by: Jon G

0

Answer 1

The correct Gen-Y fifth wheel to gooseneck adapter for your 2010 Keystone Raptor 3912LEV is the part #GY43FR. This is also the correct weight range for your trailer too. The part number you mentioned would not work.

view full answer...

Answer 2

I do have a recommendation as based on your Dimensions it sounds like you have a Fabex 750 style pin box. Currently the Trailair Air Ride 5th Wheel King Pin #UF35-946212 is our only product that will bolt to this old pin box bolt pattern. To go to…

view full answer...

Answer 3

Thanks for all of the pictures! That is exactly the information I needed. To replace the Rhino Box on your 2023 Grand Designs Momentum, I recommend the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item #GY23GR. This gooseneck adapter…

view full answer...

Answer 4

I checked with GEN-Y and they were able to get me the distance from the top bolt hole of the #GY48GR down to the bottom of the coupler which you can see in the attached picture as well as a few other dimensions. It's 23.8 inches. It does not come…

view full answer...

Answer 5

For your application you'll need the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY48GR which is designed to fit as a replacement for the unique bolt pattern of the Lippert Turning Point pin box. Reese currently (April 2022)…

view full answer...

Answer 6

If you do have the 1116 pin box then the Trailair Air Ride pin box that fits your 2018 Montana Country 331RL is the part #LC155943 which has a 21,000 lb weight capacity. You can confirm that your pin box is a 1116 by looking at the stickers or plates…

view full answer...

Answer 7

In order to use a TrailAir Ride 5th Wheel Pin Box like the #LC158778 you will need to measure the the width of your pin box (A) and the distance from the leading edge of the king pin to the leading edge of the king pin plate (B). If your measurements…

view full answer...

Answer 8

You would only need to use the Gen-Y Capture Plate #GY98FR and the filler shim part #GY76FR and would not need to use the current capture plate as well. You'd only need the Gen-Y components with your Pullrite hitch.

view full answer...

Answer 9

There should be a sticker or plate on the pin box itself that lists the manufacturer and model of the pin box. If it is not present then there are some measurements you can take to determine the model of the pin box. I have included a link that…

view full answer...

Answer 10

Even though both the Trailair Air Ride #LC158778 and the Trailair Flex Air #LC369535 look similar and incorporate the air bag and shock to help improve your towing experience, the Flex Air has a few upgrades that the Air Ride does not have. The 2…

view full answer...

Answer 11

The cushioning components of Trailair Air Ride 5th Wheel Pin Box - Lippert 1116 - 21,000 lbs Item #LC155943 won't move enough for you to have to change any height settings. But if you wanted to you could mount the new pin box one spot lower on…

view full answer...

Answer 12

Thank you for the photo of your Lippert pin box. You have their model 1116. I confirmed this with my contact at Lippert. The Trailair Air Ride 5th Wheel Pin Box #LC155943 that you referenced is a direct bolt-on replacement for the 1116. It comes…

view full answer...

Air Ride Pin Box Replacement for OEM Pin Box on a 2010 Keystone Raptor

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching