Can Prodigy P3 Brake Controller Replace Integrated Controller of 2015 Chevy Silverado
Question:
I will be installing a disc brake conversion on my fifth wheel. My truck, a 2015, Chevy 3500 Duramax has the factory installed brake controller. I want to use the Tekonsha P3 since I feel it is more reliable and has better features instead of using an HBA-CAM with the Hydrastar. Will my truck had the quick connect under the dash or do I need to splice everything in and is there a disabling process I need to complete for the unused factory system.
asked by: John K
Expert Reply:
Installing the P3 brake controller # 90195 on your 2015 Chevy Silverado 2500 with factory integrated controller will actually be very simple.
What you will do is use harness # 3016 which plugs into a port on the truck already. But you will need to remove the blue wire from the end that plugs into the truck. You will then take a length of wire, # 10-1-1, and connect it to the blue wire you removed from the connector.
Route the blue wire through the firewall, under the truck, and to the trailer connector. Avoid hot or moving parts like suspension and exhaust.
At the trailer connector, remove the wire in the 7 oclock position (looking at the back of the connector where the wires attach). Tape it up and stow it out of the way. Then attach the wire you ran to the 7 oclock position. This will bypass the factory controller without causing any dash lights/error messages to appear.
The 10-1-1 wire is sold in lengths of 1 foot. So if you needed 20 feet you would put 20 in the quantity box.
Products Referenced in This Question
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Product Page this Question was Asked From
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Choose the Right Trailer Hitch Class
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Q&A: Troubleshooting A Clunking Noise Between A Fifth Wheel Hitch And Base Rails While Towing
- Q&A: Why Is 5th Wheel Trailer Clunking When Starting/Stopping with B&W Companion and MORryde Pin Box
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Q&A: How Do I Measure the Drop Distance on a Trailer Drop Axle?
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: Parts Needed to Tow a Trailer with a 2015 Honda Pilot