How to Remove or Disconnect the Backup Camera on a 2013 Ford F-250
Question:
NONE OF YOUR INSTALLATION VIDEOS SHOW WHAT TO DO WHEN I TAKE MY TAILGATE OFF THAT HAS A FACTORY CAMERA INSTALLED UNDER THE FORD EMBLEM. AM I MISSING SOMETHING HERE?
asked by: SCOTT
Expert Reply:
Stromberg-Carlson 5th wheel tail gate # VG-97-4000 does not have provisions to remount the factory back up camera on a 2013 Ford F-250 so it will have to be removed to use this particular tail gate. To remove it there are a couple of methods depending on the location of the camera.
For a camera that is integrated into the tail gate handle:
First, lower the factory Ford tailgate and remove (8) T-30 Torx tailgate cover bolts then remove the tailgate cover.
Next, remove the camera/handle assembly by removing the two 11mm handle retaining nuts. Disconnect the camera connector from the secondary camera wiring harness by depressing the connector latch and gently pulling the connector halves apart.
Remove the camera secondary wiring harness cable by pulling the harness retainer, located at the mid-bottom of the tailgate, from its hole. Remove the license plate, or from under the rear of the pickup, locate the camera connector on the camera secondary harness, and disconnect it by depressing the connector latch and pulling the connector halves apart.
Remove the camera from the handle assembly by prying the push nuts off the two camera retaining
studs. It is very difficult to remove the push nuts without breaking off the studs. Lift the camera free of the handle assembly.
For a camera integrated into the Ford emblem:
First, Slice a screw driver blade between the Ford emblem and the emblem/camera lower housing and gently pull the emblem to separate it from the housing. (The emblem cannot be removed without breaking the retaining tabs that are on the back side of the emblem.)
Remove two 7mm bolts and separate the emblem/camera lower bracket from the tailgate. Depress the connector latch on the camera/harness connector and pull the harness from the camera.
Locate the harness retainer at the mid lower part of the tailgate between the tailgate and the pickup
box. Remove the retainer from its hole. From under the rear of the pickup locate the camera harness connector and disconnect it by depressing the connector latch and pull the connector halves apart. Remove the harness from the tailgate and the pickup box.
Remove three T-25 Torx screws and separate the camera/bracket assembly from the lower housing.
Gently push the larger snap retainer on the camera bracket with a screw driver to separate the camera from the camera bracket.
Product Page this Question was Asked From
Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate with Lock for Ford Trucks
- Tailgate
- Truck Tailgate
- Fifth Wheel Tailgate
- With Lock
- Louvered Tailgate
- Composite Plastic
- Stromberg Carlson
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Mud Flaps
- Video: WeatherTech Front and Rear Mud Flaps Installation - 2019 Ford F-350 Super Duty WT120065
- Video: WeatherTech Rear Pair Mud Flaps Installation - 2019 Ford F-350 Super Duty
- Search Results: weathertech
- Shop: WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front Pair
- Shop: WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front Pair
- Shop: WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Rear Pair
- Video: Review of Rear View Safety Backup Camera - Sprinter Third Brake Light Backup Camera - RVS-1016
- Q&A: 2-1/2 inch Hitch Shank Recommendation for an Equalizer Weight Distribution Used in 2015 Ford F-350
- Shop: Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate with Lock for Ford Trucks
- Shop: Louvered Tailgate Insert for Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate
- Shop: Truck Bed Tailgate Assist
- Shop: Tailgate
- Video: Review of TRC Enclosed Trailer Parts - Ramp Spring - 362SA5
- Search Results: snowmobile trailer parts
- Shop: Hopkins Backup Sensor System - Audible Alert - License Bracket Mount
- Shop: TorkLift PowerArmor Solar Locking Battery Box - 6 and 12V Lithium Batteries - Powder Coated Aluminum
- Shop: Camper Tie-Downs
- Q&A: 7-Way Trailer Plug Adapter or Compatibility with Lance Slide-In Truck Bed Camper
- Search Results: torklift f2012
- Search Results: torklift
- Video: Roadmaster Spare Tire Carrier Review
- Search Results: tailgate backup camera
- Video: Roadmaster Hitch Anti-Rattle - Standard Anti-Rattle - RM-061 Review
- Video: Review of Access Mud Flaps - Front or Rear Ford Splash Guard Mud Flaps - AC64FR
- Search Results: hitch sleeve
- Search Results: mud flaps
- Shop: Trailer Hitch
- Q&A: Edge CS2 Evolution Diesel Tuner - How Do I Unpair With An Old Vehicle?
- Article: Gooseneck to 5th Wheel Adapters