Dimensions of the Timbren Suspension Kit part # TFERSDLB

Question

Question:

Do you happen to know what the dimensions of this product are? height x diameter

asked by: Hayden

0

Expert Reply:

The spring found in our # TFERSDLB is 5-3/16" x 4-5/16", and the bracket is 1-1/2" tall.

Fully assembled the kit will be 6-11/16" tall.

We recommend around 1 inch of clearance from the bottom of our spring to the axle.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I'll start off by saying that currently there are no SumoSprings that have been confirmed to fit on the 2021 Thor Chateau 27R, so that's why there are not any showing up in our fit guide for your coach. However, the Timbren #TFEF350UH and…

view full answer...

Answer 2

I would be happy to help! Since you already have the Timbren front bump stops installed on your 2018 Thor Vegas 24.1' Class A Motorhome built on the E-450 chassis there is no reason to replace them. I would keep them and just add the Timbren Rear…

view full answer...

Answer 3

For your 2021 Ford E-450 Super Duty 25' Class C Motorhome I highly recommend the SumoSprings Maxim Custom Helper Springs - Rear Axle #SSR-106-47-1 as it offers 4600lbs of support to the rear suspension while also absorbing road shock and…

view full answer...

Answer 4

For your 2022 Thor Axis, I recommend going with the SumoSprings Rebel Custom Helper Springs - 2 Piece #SS42RR. These will have a 5,000 pound capacity and will suit you better than the more heavy duty #SSR-106-54-1 option. Now if you were getting a…

view full answer...

Answer 5

SumoSprings will definitely help with sag and body roll issues and the Solo #SSF-106-47 is definitely a good option for the front of your 2022 Thor Axis Motorhome. These will be a very quick and easy install on the Ford E-450 chassis as all you need…

view full answer...

Answer 6

Since you have the Firestone Ride Rite kit part #F2153 installed on your 2017 Forest River Forester 3011DS built on a Ford E-450 chassis the only suspension kit that would fit with it would be the Timbren part #TFERSDLB. The SumoSpring kits that fit…

view full answer...

Answer 7

SumoSprings are a really good idea for your 2021 Jayco Redhawk 29XK to further improve its ride, and for the front springs I recommend the 1,000 lb capacity you mentioned, along with 5,000 lb capacity for the rear. The correct fit for your '21…

view full answer...

Answer 8

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Dimensions of the Timbren Suspension Kit part # TFERSDLB

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching