Bracket Kit Recommendation for Reese Universal Fifth Wheel Rail Kit

Question

Question:

I already have 5th wheel rails. Can I get just the universal bracket kit ?

asked by: Gary

0

Expert Reply:

If you have the Reese fifth wheel rails currently the universal bracket kit you would need is the part # RP30439. This is the bracket kit that comes with the Reese rail kit part # RP30035.

expert reply by: Jameson C

0

Answer 1

The hardware you need is the Reese Universal Installation Kit for 5th Wheel Trailer Hitches (No Base Rails) #RP30439. These brackets and hardware work with Reese 10-bolt base rails to install your fifth-wheel trailer hitch. I have install videos and…

view full answer...

Answer 2

The Reese Universal Base Rails #RP58058 can technically fit your 2019 Ram 3500 short bed if you use the Universal Installation Kit #RP30439, but since this requires you to drill holes in your truck frame I recommend using the B&W Custom…

view full answer...

Answer 3

Since you already have the rails for your 5th wheel hitch and your 2013 Ram 2500 short bed you can use the universal installation kit without rails, #RP30439. It comes with the under bed brackets and hardware you will need to complete the…

view full answer...

Answer 4

The gooseneck trailer hitch I recommend for your 2018 Ram 2500 with the 6-1/2' and RamBox is the B&W Turnoverball Underbed Gooseneck Trailer Hitch part #BWGNRK1384. The reason I recommend this gooseneck hitch is because unlike the other…

view full answer...

Answer 5

To install a fifth wheel hitch in your 2004 Chevy Silverado 2500HD, you can choose between the Universal install kit which would require drilling into the truck frame, part #RP30035 or the custom install kit, part #RP50064-58 which uses existing…

view full answer...

Answer 6

We do not recommend mixing brands of 5th wheel base rails and under-bed installation brackets. The reason is that the preciseness of the fit and the actual weight capacity will be unknown since these parts will not have been tested together. To…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 12

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Bracket Kit Recommendation for Reese Universal Fifth Wheel Rail Kit

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching