Drop Shank Options for Husky Centerline Weight Distribution System
Question:
Hello, I recently changed towing vehicles to a 2015 Ford Expedition EL, Im using the Husky CenterLine TS WD hitch with the original supplied shank, it looks like Im going to need more drop, could you recommend a good replacement shank with enough drop for this vehicle please. Thank you
asked by: Andrew H
Expert Reply:
All of the weight distribution systems use the same shank mounting dimensions so other brands of weight distribution shanks can be used with your Husky Centerline TS. If you need just a few more inches of drop the Curt shank part # C17123 would work well. For a bit more of a drop the # C17124 would work well.
The largest drop we have is the part # C17125 which probably would be too much for you setup.
Products Referenced in This Question
Curt Welded Weight Distribution Shank 7" - 10 Hole Adjustment
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 15000 lbs GTW
- Fits 2 Inch Hitch
- Round - 8 Inch Drop
- Trunnion - 8 Inch Drop
- Round - 12 Inch Rise
- Trunnion - 11 Inch Rise
- CURT
more information >
Curt Weight Distribution Shank 13" Long - 9" or 10" Drop - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1600 lbs TW
- 16000 lbs GTW
- Fits 2 Inch Hitch
- Round - 9 Inch Drop
- Trunnion - 7 Inch Drop
- CURT
more information >
Curt Weight Distribution Shank - 12" Long - 15-3/4" or 16-1/4" Drop - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 15000 lbs GTW
- Fits 2 Inch Hitch
- Round - 16 Inch Drop
- Trunnion - 15 Inch Drop
- CURT
more information >
Continue Researching
- Shop: Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW
- Shop: Curt Welded Weight Distribution Shank 7" - 10 Hole Adjustment
- Search Results: 10"
- Search Results: equalizer hitch
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop
- Shop: Equal-i-zer Weight Dist Shank - 12" Long - 8" Rise, 4" Drop - 600 to 1,400 lbs TW
- Shop: ProPride 3P Weight Distribution Hitch w/ Sway Control for 2-1/2" Receivers - 10K GTW, 1K TW
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 7" Rise, 3" Drop
- Shop: Curt Adjustable Weight Distribution Shank - 8"
- Q&A: How to Measure to Find Weight Distribution Shank with the Right Amount of Drop to Tow Trailer Level
- Shop: Trailer Hitch
- Search Results: shank
- Search Results: 2 1 2 inch weight distribution shank
- Article: How to Measure for Trailer Hitch Drop
- Q&A: 2 1/2 Shank Recommendation for Use with the Husky Center Line HT32218 WD System
- Q&A: Compatibility of Weight Distribution Shank for 2-1/2 Inch Receiver on Ram 2500
- Q&A: Weight Distribution Shank for 2021 Chevy Silverado with Equal-i-zer Weight Distribution 2.5 Hitch
- Q&A: Replacement 2-1/2 Inch Shank with More Drop for Equal-i-zer Weight Distribution System
- Q&A: Can Equal-i-Zer System for 2 inch Hitch be Adapted to 2-1/2 inch Hitch with Shank Swap
- Q&A: Recommended Shank for Using Husky Weight Distribution System with 2-1/2 Inch Trailer Hitch Receiver
- Search Results: weight distribution hitch
- Search Results: rg06~070
- Search Results: akebrk~6r
- Video: Curt Welded Weight Distribution Shank Installation - 2017 Chevrolet Silverado 2500
- Video: Curt Weight Distribution Shank Review
- Shop: BOLT brand vehicle and hitch locks
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
Javid
7/7/2020
I am pulling a 20’ car hauler with a 2015 Tundra that has a 4” lift. Trailer tongue height is 15.5 and ball on truck measures 19. Measured to same respective positions. This is for a Husky Centerline WDH. What would you recommend?