How to Connect 4-Way Directly to the Draw Tite Hitch # 75528 on a 2009 GMC Acadia

Question

Question:

How can I bolt directly to the Draw tite hitch 75528

asked by: Bill Y

0

Expert Reply:

A 4-Way mounting system that I like to use is the Mounting Bracket 4-Pole Flat, item # 18144, Which would bolt right up to the mounting bracket on the Draw-Tite, # 75528, hitch.

expert reply by: Robert G

0

click to enlarge

Answer 1

You are not missing anything. The lug nuts can simply be removed, and off comes the tire. The lock is merely providing a deterrent. The vast majority of thieves are looking for the easy grab, anything you can do to slow them down or discourage them…

view full answer...

Answer 2

Thanks for following up with the photo. I see that you have size 225/75/15 tires with the 6 on 5-1/2 inch bolt pattern. We do not have the specific wheels you have, but we do have similar options. If you want the aluminum wheel with the tire…

view full answer...

Answer 3

The Demco #DM15853-52 has 1/2" x 1-1/4" grade 5 bolt with fine threads (.50NF) so you'll want to use 1/2" nuts with a fine thread to secure your tires.

view full answer...

Answer 4

There are a number of factors involved when converting a semi 7-way to an RV 7-way. Semis generally use a 7-pin round pin socket, similar to #PK11720. And RV style 7-way uses blades, like #PK12706. We do not offer any pre-made adapters to make this…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Answer 8

The best hitch for a 2024 Hyundai Tucson is the etrailer Hitch item #e38KR. This hitch is custom fit and bolts to your Tucson with included hardware. It is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 525 lbs…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

Hey Steve! I really like having the wiring sit next to the receiver as well so I definitely get where you're coming from. Here are the parts I recommend installing on your 2024 Mazda CX-5: - etrailer Trailer Hitch Receiver #e98902 - Curt…

view full answer...

Answer 11

I did some looking around and it doesn't actually look like there is a hitch that will work with your 2016 Mercedes-Benz C63 AMG. The hitch #C11485 you're looking at is only going to work with the C300 and will not work with your C63. The…

view full answer...

How to Connect 4-Way Directly to the Draw Tite Hitch # 75528 on a 2009 GMC Acadia

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching