Measurement Of Dexter Trailer Hub Assembly # 8-258-5UC1
Question:
Thanks again for your help. I could not find GVW on axle or trailer body, the stickers with numbers were un readable, trailer is 30 years old single axle. Can you tell me the front to back measurement on the hub # 8-259-5uci-ez. this is for a 8-12" wheel. Again my old hub is 3-3/8" front to back measurement with 5 lugs on 4-1/2" centers.
asked by: Clark S
Expert Reply:
The Trailer Hub Assembly # 8-258-5UC1 measures 4-1/4 inches from front to back. As long as you have the length on your spindle, you won't have any issue. That measurement is not including the grease cap, it is just the hub from edge to edge. There is 2 inches on either side of the hub face which is 1/4 inch thick.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 9 Inch Wheel
- 10 Inch Wheel
- 11 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Recommended Replacement for Dexter 8-259 Idler Hub
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - L44649 Bearings
- Q&A: Replacement Trailer Hub with L44649 Inner and Outer Bearings and 5 on 4-1/2 Bolt Pattern
- Q&A: Replacement Dexter Trailer Axles Marked 8-259
- Q&A: Hub Recommendation for Spindle that is 1 inch in Diameter and has 5 on 4-1/2 inch Bolt Pattern
- Q&A: Trailer Hub Recommendation for a Trailer that has Inner/Outer Bearing L44649
- Q&A: Replacing Trailer Hubs on Loadrite Trailer
- Q&A: Replacement Dexter Hubs that are Marked 8-259
- Search Results: dexter 8 259
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 8-259-5UC1 Review
- Search Results: dexter 8~259
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Video: Choosing the Right Trailer Wiring
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Brake Controller
- Search Results: 68149
- Search Results: 25580
- Shop: Grease Seals 10-36 (pair)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Brake Controller
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Article: Trailer Tire Sizing
Clark
5/10/2017
Thanks again for your help. I could not find GVW on axle or trailer body, the stickers with numbers were un readable, trailer is 30 years old single axle. Can you tell me the front to back measurement on the hub # 8-259-5uci-ez. this is for a 8-12" wheel. Again my old hub is 3-3/8" front to back measurement with 5 lugs on 4-1/2" centers.