Wiring Adapter Required to Install Prodigy P3 Brake Controller 90195 in 2017 Chevrolet Traverse

Question

Question:

I have a 2017 Chevy Traverse With the Towing Package. Will a Tekonsha Prodigy P3 Come with the nessary Wiring and Plug To mate with the Car

asked by: Ted H

0

Expert Reply:

It is easy to install the excellent Prodigy P3 Trailer Brake Controller # 90195 in your 2017 Chevy Traverse with factory tow package by using the plug-in wiring adapter # 3026-P. You will need to order both items. This harness plugs in between the back of the P3 and the connection port under the Traverse's dash. Please refer to the link video showing these items installed in a 2015 Tahoe.

expert reply by: Adam R

0

Answer 1

On a 2018 Chevy Traverse that has blunt cut brake controller install wires under the dash you do not need to install any fuses or anything else to activate the wiring. On the 2018 Traverse the blunt cut wires should be inside the front driver side…

view full answer...

Answer 2

5,000 lbs appears to be the weight capacity of the 2018 Chevy Traverse if it has the 3.6 liter V6 engine and 1,500 lbs if the engine is the 2.0 4 cylinder. Those figures are the fully loaded capacity that your truck can tow. If you are going to be at…

view full answer...

Answer 3

Thanks for following up with us on where to find the brake controller wiring to install a controller in your 2018 Chevy Traverse with a factory 7-way! We'll post this info on our site so that future customers can be helped!

view full answer...

Answer 4

According to the online version of the owner's manual for your 2018 Chevy Traverse the blunt cut wires carry the following functions: Blue - To Trailer (Brake Controller Output) Red/Black or Red/Blue - Battery Feed White/Blue - Brake Apply Signal…

view full answer...

Answer 5

Check to see if the third brake light of your 2019 Chevy Traverse is still working like it should. It's possible the third brake light fuse went out and now the stoplight circuit of the brake controller wiring is now not active either. This a…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 9

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 10

Weight distribution works to distribute the tongue weight of a trailer up to the front axle of the tow vehicle so that it will sit more level and handle/brake better. That being said the systems do not "reduce" tongue weight or allow you to…

view full answer...

Answer 11

The Electric Jack w/ Footplate and 7-Way Plug #EJ-3527-BBX uses a 7-way RV-style plug. I have included a diagram that shows the pin-out for RV style 7-way plugs. This will show you what each pin does. I have also listed the functions below and linked…

view full answer...

Answer 12

The round or trunnion bars refers to the end of the spring bars. Round bars are typically designed for lighter applications, are a bit harder to install and are usually priced lower than trunnion bars. Trunnion bars are typically designed to be used…

view full answer...

Wiring Adapter Required to Install Prodigy P3 Brake Controller 90195 in 2017 Chevrolet Traverse

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching