Availability of 2-5/8 inch Locking Hitch Pins That Can Be Keyed Alike

Question

Question:

I need 2- 5/8 locking hitch pins keyed alike

asked by: Paul J

0

Expert Reply:

The etrailer.com Trailer Hitch Receiver Lock, part # e98880, which is designed to fit 2 inch hitch receivers is what you are looking for. You can choose how many you need keyed alike on the product page. This receiver lock has a pin diameter of 5/8 inches and an inside width of 2-5/8 inches. The overall length of the pin is 6 inches.

expert reply by: Jon G

0

Answer 1

Technically, chrome is harder than stainless steel but it isn't going to be a difference between stopping a thief or not stopping one. If a thief really wants to, they'll be able to remove any lock, locks are more of a theft deterrent and…

view full answer...

Answer 2

The 2 inch spacing you have between the front and rear tires is enough to use Ultra-Fab chock #UF21-001060. It will fit tire spacing of 1-1/2 to 5-1/4 inches. I have included a link to a video review for you. For a set of 2 use #UF21-001070. You can…

view full answer...

Answer 3

It is not necessary to use red Loctite like #LT37420 on the hitch bolt of the Roadmaster Hitch Mounted Spare Tire Carrier #RM-195225. It is optional, like you mentioned, and the intent with the Loctite is simply added tightness at the connection and…

view full answer...

Answer 4

Roadmaster recommends against using their Spare Tire Carrier #RM-195225 with a high-low adapter. For another solution you may be able to use a high-low adapter for the tow bar and carry the spare tire carrier on the back of the vehicle being flat…

view full answer...

Answer 5

We have exactly what you're looking for! I recommend installing the SumoSprings Solo Custom Helper Springs #SSR-130-54 on your 2024 Jayco Greyhawk 29MV (Ford E-450) because it can support up to 2,800 lbs and it's compatible with the JRide…

view full answer...

Answer 6

Hey HPA, I would go with the Air Lift kit part #AL64VJ that fits your 2019 Toyota RAV4 based on what you described and your needs. This gives you adjustable support that you can tailor as needed so that you get the exact amount of support you need…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

To add a hitch with a 2" receiver to your 2024 Acura MDX, I recommend the etrailer item #e27KR. This hitch has a 900 lbs maximum tongue weight so it will work great with your Thule bike rack. I really like the way it installs too. The only…

view full answer...

Answer 9

The lock plug for the Rapid Podium Feet for Thule Crossbars #TH460R has been discontinued, unfortunately. So, your only option is to use their lock cores #TH450400 to secure your feet.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Looking at the BAL Retract-A-Spare it has a much different design than the Lippert Spare Tire Winch #LC159056 you found. You may be able to mount the new winch so it will still work on your trailer but as we do not have both the products here with…

view full answer...

Answer 12

In order to use a hitch-mounted bike rack like the Swagman Original #S64152-2 that you were looking at while towing a vehicle, you will just need to add the Roadmaster Dual Hitch Receiver Adapter #RM-077-4. This adapter will slide into the 2 inch…

view full answer...

Availability of 2-5/8 inch Locking Hitch Pins That Can Be Keyed Alike

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching