Powered A-Frame Jack Recommendation for Trailer with 2,000 lbs of Tongue Weight

Question

Question:

I have a trailer it weighs 4000 lbs empty can carry and additional 4000 lbs with a tongue max weight of 2000 lbs what kind of electric front tongue jack and what size do you recommend?

asked by: Dr R

0

Expert Reply:

For your application, I recommend the Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift Item # JET-5000.

It has a lifting capacity of 5,000 lbs which would be more than you'd need since your tongue weight could be up to 2,000 lbs but will ensure that the jack will operate quickly and last a long time.

expert reply by: Jameson C

0

Answer 1

If you have 12 volt lights in your trailer that you are wanting to power with your trailer's battery all you need to do is run the power and ground to the battery. When your tow vehicle is connected they will either be powered by the 12 volt…

view full answer...

Answer 2

From the center of the tube to the furthest part of the motor housing on the Stromberg Carlson Electric Trailer Jack item #JET-5000 measures right at 5-3/4". The distance from the mounting bracket to the top of the jack is 23". This jack…

view full answer...

Answer 3

You can put a maintenance charge on your trailer battery with the 12 volt accessory circuit of the 7-way. The 1:00 position of your 7-way carries this circuit. You would just need to run a length of 10 gauge wire like part #10-1-1 (sold by the foot),…

view full answer...

Answer 4

We do have the panels separately. What you're looking for is the Go Power Overlander Expansion Kit - 200 Watt Solar Panel #34282182.

view full answer...

Answer 5

Hey Steve, so the most similar option that would be an upgrade to what you have now would be the Redarc BCDC charter part #331-SBI12-BLD which will do a great job managing all of the batteries in your setup that need to be charged. This has an output…

view full answer...

Answer 6

The best way to power the interior lights in your trailer is with its own independent battery. You will not want to use the breakaway battery. The breakaway battery is only designed to operate the breakaway and will drain extremely quickly,…

view full answer...

Answer 7

You are correct in your description of how to wire in a new auxiliary battery in your enclosed trailer. You will take the 7-Way's 12V power feed and route this to the positive terminal on the auxiliary battery, and you will ground the second…

view full answer...

Powered A-Frame Jack Recommendation for Trailer with 2,000 lbs of Tongue Weight

Product Page this Question was Asked From

Continue Researching