Is there a Difference Between Reese and Curt Friction Sway Control Ball and Plate Assemblies

Question

Question:

Difference between Reese RP58062 & Curt C17201 There are both ball and plate assembly , I did notice Reese is bigger than Curt.... But there is also a huge difference is price. I need one for a tent trailer, of less than 2,000 lbs. Wich one should I buy ? Thank you.

asked by: Marc L

0

Expert Reply:

Either Replacement Ball and Plate Assembly # RP58062 or # C17201 will work. The balls are the same size so the only difference is the size of the plate each ball is welded to. If it was me I would go with the Curt # C17201.

expert reply by: Michael H

0

Answer 1

Hey Colin, Both the TruXedo Sentry CT Hard Tonneau Cover #TX1597716 and BAK Revolver X4s Hard Tonneau Cover #BAK39ZR are essentially the same cover with just some minor aesthetic differences. Both operate exactly the same and sit on the bed the same…

view full answer...

Answer 2

I spoke with TruXedo and they told me that the width of the TS Rails for TruXedo Elevate Rack System #TH75FR is 1 1/2".

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

You can install a 7 way connector on your 2019 Ford F-150 by using the Curt T-Connector #C56413, which will plug into the factory supplied 4 way connector plug on your vehicle and give you a fully functioning 7 way connector. If you've got a…

view full answer...

Answer 5

Hey Mark, the closest replacement we have for your Connex WMS-DVDZ3 is the RV RV Stereo w/ DVD Player #292-101809. This stereo measures 16-3/4" wide x 4" tall x 6" deep, has a cut out of 9" wide x 3-1/4" tall x 5-1/4"…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Thanks for reaching out, Jeff! While I'm not familiar with adding an OEM-style brake controller to a Ford pickup, since your 2019 F-150 didn't initially come with the factory tow package my instinct is to have you check fuse 24 for your brake…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Is there a Difference Between Reese and Curt Friction Sway Control Ball and Plate Assemblies

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching