Can Camper Shell with Headliner have Rhino Rack Track Roof Rack Y02-480B Install

Question

Question:

Will this item work with a headliner in the Snugtop shell?

asked by: Dirk F

0

Expert Reply:

Yes, you will need to lower the headliner ideally to install the tracks of the Rhino-Rack Roof Rack System # Y02-480B on your Snugtop camper shell but it will work just fine. Once installed you would be able to reinstall the headliner.

expert reply by: Jameson C

0

Answer 1

The Rhino-Rack Backbone Roof Rack Mounting System #RRRJLB1 is designed to reinforce the structure of your Jeep's hard top so you can carry more weight but it won't physically interfere with the removal of the hard top. Once installed…

view full answer...

Answer 2

Since your factory roof tracks are removed, you will need a complete roof rack kit that includes the roof tracks. I think your best option is to go with Rhino-Rack Aero Bar Roof Rack #Y02-480B.. This kit includes 63" long tracks that will…

view full answer...

Answer 3

Yes the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells #Y01-130B will fit in the tracks you have on the top of your Leer camper shell.

view full answer...

Answer 4

The easiest and most cost efficient way to add a roof rack to the Leer camper shell you have on your truck would be the Rhino-Rack #Y02-480B. This comes with a track system as well as the crossbars and feet needed.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 9

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 10

Thanks for reaching out, Joe! I recommend using the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B which comes with 63" long tracks as well as 54" long crossbars which should give you a little bit of overhang on your canopy. Per…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

The Rhino-Rack Aero Bar Roof Rack for Camper Shells part #Y02-480B is a great option for fiberglass truck bed campers as it was made for this exact purpose. It can support up to 220 lbs but bear in mind this rating is tested independently of the…

view full answer...

Can Camper Shell with Headliner have Rhino Rack Track Roof Rack Y02-480B Install

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching