Blank Display on Touchpad Remote for Lippert Ground Control 3.0

Question

Question:

Is there anything I can do to reactivate the LCD touch pad screen. The leveling unit an LCI ground control 3.0, works however the LCD screen is blank

asked by: Daniel

0

Expert Reply:

You may need to reconfigure the remote. Press the large silver button 5 times to access the configuration menu. Also, make sure the touchscreen remote is charged. If the unit will not power on and remains blank no matter what you try then there is likely an internal problem and it will need to be replaced. For a replacement if needed it is # LC358601.

expert reply by: Michael H

0

Answer 1

The 5 inch and 7 inch screens are interchangeable. If you want a 5 inch screen you'd want the part #LC83VR or if you want a 7 inch screen part #LC75UD.

view full answer...

Answer 2

Yes, the Replacement Touch Screen Control Panel for Lippert Ground Control TT Trailer Leveling System #LC83VR that you referenced does replace the Lippert part number 675806 as well.

view full answer...

Answer 3

Thank you so much for the photos! They were super helpful, and I can verify for you that the correct touch screen panel for your Lippert 6-point leveling system is the part number you asked about: - Replacement Touch Screen Control Panel #LC83VR This…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 10

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

A 4-way trailer connector will have four functions which means it will also have four wires for the exception of wishbone harnesses. These four functions are ground, tail light, right turn, and left turn. The ground function will usually be…

view full answer...

Blank Display on Touchpad Remote for Lippert Ground Control 3.0

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching