What Wiring Harness is Needed to Install Tekonsha Prodigy P3 on Motorhome with 2015 F-53 Chassis

Question

Question:

I have a 2015 F53 chassis in my Class A Coachman motorhome. What harness do I use with the Tekonsha 90195 P3?

asked by: Cosby

1

Helpful Expert Reply:

In order to install the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 on your Coachman Motorhome with a 2015 Ford F53 chassis, you will use the Tekonsha Plug-In Wiring Adapter # 3035-P. One end of the adapter will simply plug into the brake controller and the other end will connect to the built-in harness beneath the dash.

If you do not have a 7-way installed, you will also need to install the Hopkins Adapter 4-Pole to 7-Pole and 4-Pole # 37185.

I have included a video review of this harness for you to check out.

expert reply by: Chris R

1

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

We sure do! The etrailer Electric Trailer Brakes item #AKEBRK-35 work with 3,500 lbs axles that have a 4 bolt mounting flange. These left and right 10" x 2-1/4" assemblies have rust-resistant, e-coated backing plates that work with 15"…

view full answer...

Answer 5

Since you already have a factory 4-way flat on your 1996 Ford F-350 you will need the Adapter 4-Pole to 7-Pole #37185. This will plug into your factory 4-way and the rest of the wiring will have to be spliced into your factory wiring as I do not see…

view full answer...

Answer 6

To install your Reese Pod brake controller in your 2018 Ford Explorer will require the install harness part #3035-P which is a confirmed fit. If you check out the 9:55 mark of the install video I attached to this page you'll see where to find the…

view full answer...

Answer 7

Your 2014 Fleetwood Bounder should be on a Ford F-53 chassis. If you found the gray plug next to the brake release (see attached photo) then this means that you should just be able to use a plug-in adapter to easily install your brake controller. Out…

view full answer...

Answer 8

On the 2014 Ford F-53 chassis the brake controller port is located on the left hand side of one of the steering column supports. The plug is gray in color, and you should be able to see it if you look to the right of the emergency brake release…

view full answer...

Answer 9

Thank you for reaching out and for the photos! We try to carry over the wiring brackets and for a long time they didn't change which is why we carried it over. With this new information we will definitely be updating our website. For your…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

What Wiring Harness is Needed to Install Tekonsha Prodigy P3 on Motorhome with 2015 F-53 Chassis

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching