Does MaxxAir TuffMaxx Replacement Shroud # MA00-325001 Fit Mach 3 AC Unit

Question

Question:

I have a 6759 mach 3 model number 6759c707. Will this fit my unit?

asked by: Meagan

0

Expert Reply:

Yes, because the MaxxAir TuffMaxx Replacement Shroud # MA00-325001 is designed to fit Mach 3 units like yours this would work well for you.

expert reply by: Jameson C

0

Answer 1

The MaxxAir TuffMaxx Replacement Shroud #MA00-325001 that you referenced is a replacement shroud for Coleman-Mach Mach 1, Mach 3 and Mach 15 models and includes the stainless steel mounting hardware plus the instructions. If you are still unsure if…

view full answer...

Answer 2

For a replacement shroud on your Coleman 7300 series AC you can use the MaxxAir TuffMaxx Replacement RV Air Conditioner Cover #MA00-325001. Your 7300 series should be a Mach 3 which falls under the fit for this shroud. However, I do recommend…

view full answer...

Answer 3

I can tell you how to go about determining the correct replacement AC shroud for your 2003 Keystone Montana, but we wouldn't have any way of knowing what AC or shroud is on your RV to know a direct replacement. The only way to choose the correct…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is comfortability when you…

view full answer...

Answer 10

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...

Answer 11

Can you email me the pictures? Its going to be one of the following two though. Either part #MA00-325001 or #MA8335A5261. Whichever looks like what you have would be correct.

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Does MaxxAir TuffMaxx Replacement Shroud # MA00-325001 Fit Mach 3 AC Unit

Product Page this Question was Asked From

Continue Researching