How to Pick Out Replacement Key for Trule Archway Trunk Bike Rack

Question

Question:

Hello. I have a Thule Archway 9010xt that is missing the Lock Key. Can I get a replacement key only or I need to change the lock. The lock is still attached on the rack. Thanks!!

asked by: Thomas

0

Expert Reply:

On the lock cylinder there will be a number stamped on it. With the number you will be able to pick out the correct replacement key to open your cargo box.

For example if you have the key number 2982 you would want the replacement key part # THKEYN2982.

expert reply by: Jameson C

0

Answer 1

There are several bike rack manufacturers that make wheel hoops to accommodate fat bikes. For example, if you have the Swagman XTC-2 2-Bike Platform Rack #S64670, Swagman offers the Fat Bike Tire Wheel Adapter #S64674. This adapter will fit fat tires…

view full answer...

Answer 2

You're in luck! There's no need for a 2" hitch if you want to carry two ebikes! I really like the Thule EasyFold XT 2 E-Bike Platform Rack #TH903202 for ebikes because it makes loading and unloading ebikes easier. It works with both a…

view full answer...

Answer 3

The Curt Bike Rack for 2 Electric Bike #C89JR will actually not work with your Hey Bike rack as it will interfere with your fenders. Instead, I recommend checking out the Lets Go Aero V-Lectric FAT PRO Bike Rack for 2 Electric Bikes #LGA77FR. This…

view full answer...

Answer 4

I am assuming you meant Yakima Holdup part #Y02443 as there isn't a Standup bike rack they offer. This is a pretty similar bike rack to the Curt E-Bike Rack part #C89JR in a few ways as they are both platform racks that use wheel mounts to secure…

view full answer...

Answer 5

There's really only one great solution for carrying an e-bike that has fat tires with a 1-1/4 inch trailer hitch. For that you'd want the Saris Freedom SuperClamp part #SA4025F as it has the higher capacity needed for e-bikes, has wheel…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

How to Pick Out Replacement Key for Trule Archway Trunk Bike Rack

Product Page this Question was Asked From

Continue Researching