Need Replacement Quick Grip Hardware For Thule Atlantis 2100 Roof Cargo Box

Question

Question:

Im looking for quick grip replacement hardware for a Thule Atlantis 2100 box. Can I replace them with the 1600/1800 you offer here: TH05738 or do I need to find a larger unit? Thank you in advance!

asked by: Adrienne

0

Expert Reply:

I contacted our representative at Thule and she verified that the Replacement Quick Grip Mount Assembly, part # TH05738, is the correct replacement hardware for your Thule Atlantis 2100 Roof Cargo Box.

The Replacement Quick Grip Mount Assembly, part # TH05738, will work on the Thule 1600, 1800 and 2100 series roof cargo boxes.

If you need the replacement screws for the mount assembly, you will need Replacement Screw, part # TH05728.

expert reply by: Reno H

0

Answer 1

The Replacement Quick Grip Mount Assembly, #TH05738, are confirmed to work with the Thule Atlantis 2100 Cargo Box. If you need cradles as well you would need the part #TH8523387001.

view full answer...

Answer 2

It is possible that the Replacement Quick Grip Mount Assembly #TH05738 will work on your BMW box, though they have never been tested together and we don't have any type of access to those cargo boxes so it is impossible to make a definitive…

view full answer...

Answer 3

The rubber pieces that are on the claws of the Replacement Quick Grip Mount Assembly #TH05738 aren't available separately so if yours are no longer there and you are wanting to replace them you will need a whole new mount assembly.

view full answer...

Answer 4

We do have replacement mounting hardware for your older Thule Atlantis 1800 687 cargo box! The Quick Grip is part #TH05738, and then we also have the Slide Strip #TH05401 and the Replacement Cradle #TH8523387001 as well if you're needing those.

view full answer...

Answer 5

I believe you were referring to the warranty and on this product there is none since it is a replacement part. I reached out to my contact at Thule about the Replacement Quick Grip Mount Assembly #TH05738 and they said to make sure that when you…

view full answer...

Answer 6

The serial number for your Thule Summit Cargo Box per Thule will be engraved underneath the lid near the front of the lid. We do not have any reverse mounting hardware that will enable the lid to open from any side besides the normal left side. I…

view full answer...

Answer 7

The only way to remove a Thule lock cylinder like the ones in #TH450400 is by inserting the master key into a cylinder in the unlocked position. However, I have a few tips and tricks to help you remove the broken key to allow for the master key to be…

view full answer...

Answer 8

Thanks so much for the photo and the info on your cargo box model. I'm not 100 percent certain which part you are referring to, so I will list all of the available replacement parts for your Thule Atlantis 1600XT cargo box, which I confirmed with…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

The Underside Tie Down Point #RRS606 will fit into the tracks on the underside of a Rhino-Rack Pioneer Platform Rack like the #RR78AB. Regular tie-downs #RR43VT and eye bolts #RR46XP are also available for the top channels on the rack.

view full answer...

Answer 12

I suggest the Curt Trailer Hitch Receiver, #C13277 due to the way it mounts. You will need to trim the fascia to install this or any other model hitch on the Audi Q7. But this has best clearance and build quality. Please note the linked instructions…

view full answer...