Universal Towing Mirror Recommendation for a 2006 Land Rover LR3

Question

Question:

I have a 2006 LR3 Land Rover and would like to know which is the best clip/clamp on towing mirror or any towing mirror.

asked by: Juan R

0

Expert Reply:

For your 2006 Land Rover LR3 I recommend the K-Source towing mirror set # KS3990. These mirrors will fit around factory side mirrors that have a lip or gap between the glass and mirror housing. I checked some images of your make and model vehicle and it does have the compatible type of side mirrors from what I could see. I have included a link to a video review of these mirrors for you.

expert reply by: Michael H

0

Answer 1

We have universal tow mirror options that will work great on your 2005 Land Rover LR3 SE like the K-Source Tow Mirrors part #KS3891-2 but we do not have any custom fit mirrors like what you mentioned that fit your vehicle. The ones you mentioned…

view full answer...

Answer 2

Although we don't offer a custom mirror for the 2017 Lincoln Navigator, we do have a good universal-fit option that will work well for you. I'd recommend the K-Source Dual Lens Towing Mirrors, part #KS3990. The mirror features 2…

view full answer...

Answer 3

Look at the side of the master cylinder and you'll be able to tell which type of brakes it is designed for by the number. If you see 23744 stamped into the side of it you have a drum brake model. If you have 25744 stamped in the side it's for…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 6

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 7

A cover being installed on your spare tire would not prevent the Swagman Bike Rack part #S80501 from installing. The rack would still fit and work well. You might still compare the dimensions in the picture I attached with you spare tire so that you…

view full answer...

Answer 8

Most critical to trailer tire performance and durability are 1) proper inflation 2) observance of the tire's rated load capacity and 3) observance of the tire's speed rating. If either of these factors is off the mark then the tire will tend…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

I wish I could say yes, but as of right now they are not a fit for the 2016 models and we do not have any other suspension enhancement options. If you are trying to fight suspension sag from the tongue weight of a trailer there is a better option. A…

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...