Troubleshooting the Curt T-Connector with 4-Pole # C55510 When the Tail Lights are not Working
Question:
My blinker works but my tail light does not light up?
asked by: FLOYD A
Expert Reply:
First, check the connections on the vehicle that plug into the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, # C55510. If one of the pins in the connector is bent or misaligned, then this could be the reason your taillights are not lighting up.
If the the connection at the vehicle is good, then you can check the signal output at your vehicle's 4-flat plug. Have someone sit in the cab of the vehicle to operate the lights and turn signals. Using a 12-volt probe, like # PTW2993, turn on lights and use tester on the brown, yellow and green wire leads. If all three light or sound the tester, then the powered wires are ok.
Now you will have to check the lights and the wiring on the trailer. You can use the tester to see if you are getting power to the taillights when connected to the vehicle. The turn signal and taillight travel on different wires, so there may be an issue with the taillight wire somewhere along the trailer. Check the light bulbs and the ground to make sure they are not damaged as well.
I have liked a help article on testing trailer wiring for you to view.
Products Referenced in This Question
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Best 2016 Mazda CX-5 Trailer Wiring Harness Options
- Q&A: How to Wire Marker Light With Red and Black Wires
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2016 Mazda CX-5
- Video: Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C56310 Review
- Video: Trailer Wiring Harness Installation - 2016 Mazda CX-5
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: Troubleshooting Wire Harness Short Circuit on a T-One Trailer Wiring Harness with Converter
- Q&A: Vehicle Will Not Start After Installing Curt T-Connector Trailer Wiring Harness # C56012
- Video: Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C55585 Review
- Shop: Brophy Basic Turnbuckle for Camper Tie-Downs - Qty 1
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 44649
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Trailer Hitch
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Video: Choosing the Right Trailer Wiring
- Search Results: 25580
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Brake Controller
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Video: Choosing the Right Brake Controller
- Search Results: dust cap
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
- Shop: Gooseneck Hitch
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Search Results: 15123
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
on Custom Fit Vehicle Wiring
