Could Strap of Replacement Mounting Hardware part # Y8860078 be Easily Cut

Question

Question:

Can it be cut easily if someone wanted to steal the ski rack?

asked by: Jay W

0

Expert Reply:

The strap portion of the Replacement Mounting Hardware part # Y8860078 is made of a rubber coated steel and would not be easy for a thief to cut.

expert reply by: Jameson C

0

Answer 1

The replacement mounting hardware you will want for your 2010 version of the Yakima FatCat 6 #Y03088 is the Replacement Mounting Hardware for Yakima FatCat Ski and Snowboard Carrier #Y8860048. This is the replacement mount for the previous version of…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

If your Yakima Fatcat is fully functional as-is and has all of the old mounting components and you wanted to replace what you have with the part #Y8860078 there would be no additional mounting hardware needed.

view full answer...

Answer 5

I reached out to my contact at Yakima to ensure we get you the right mounts you need. He told me that for you Yakima Buttondown 4, you will need the Universal MightyMounts for Yakima Roof Mounted Accessories, #Y03590. These MightyMounts will ensure…

view full answer...

Answer 6

If your 2002 Acura MDX has factory roof rails, the Replacement Mounting Hardware for Yakima FatCat #Y8860078 has been confirmed by Yakima to fit. This hardware was designed for the newer Fat Cat ski carriers, but will work with the 2010 version of…

view full answer...

Answer 7

Thanks so much for the photos, they were very helpful. To replace all four cradles, what you need is two of the Replacement SuperCush Anti-Sway Cradle and ZipStrips #8880598 (which has the upper and lower ZipStrip) along with two of the Replacement…

view full answer...

Answer 8

The Replacement Mounting Hardware #Y8860078 does, in a roundabout way, lock to the roof rack on your vehicle. Both the discontinued Yakima FatCat ski and snowboards carriers, as well as the Yakima FatCat EVO 6 Ski and Snowboard Carrier #Y03096,…

view full answer...

Answer 9

I called my friend over at Thule and they said they do not have the replacement knob available separately. The Replacement Knob for the Thule Apex #TH79JV is a different part number with only the Thule Apex and the Thule Raceway as confirmed fit.…

view full answer...

Answer 10

According to Yakima, the difference between the Replacement "A" Wheel Tray Assembly #8880796 and Replacement "B" Wheel Tray Assembly #8880797 is the following: "Look at the base of the wheel cup and look at the cut out above…

view full answer...

Could Strap of Replacement Mounting Hardware part # Y8860078 be Easily Cut

Product Page this Question was Asked From

Continue Researching