Recommendation for a Coupler Lock for a Collar-Loc Trailer Coupler

Question

Question:

Will this lock work with a sliding collar-lock coupler? I have a Bulldog 12,500 lb., 2-5/16 coupler.

asked by: Jody

0

Expert Reply:

For a Collar-Lok coupler I recommend a lock designed for then such as # BLTL-23 (2-5/16 inch ball), # BLTL-20-40D (1-7/8 to 2-5/16 inch balls), or # BLTL-22 (2 inch ball).

expert reply by: Michael H

0

Answer 1

The EZ Lock Trailer Coupler Lock #BLTL-20 is 2-5/8" from the base of the ball to the bottom of the lock pin. The EZ Lock Trailer Coupler Lock #BLTL-20-40D is available with both the coupler lock and Master Lock Stainless Steel Padlock with…

view full answer...

Answer 2

It's definitely possible to upgrade a trailer's axle rating to a higher rating by just swapping the axles. To pick out the correct axle you'll need to measure the distance between the hub faces and the spring seat centers and you'll…

view full answer...

Answer 3

I took a look at what you're needing, and it appears that we do not have a replacement front anchor plate for your 2017 Ram 3500 Dually long-bed, however, I know it isn't ideal, but you might be interested in checking out the HappiJac…

view full answer...

Answer 4

You are going to be able to use either the original Voyager WiSight or the WiSight 2.0 with the Voyager Prep on your 2022 Winnebago Micro Minnie 1700BH. The prep is simply the electrical connection and the specific mounting pattern for the screws on…

view full answer...

Answer 5

To bypass the factory integrated brake controller (ITBC) on your 2012 GMC Sierra 3500 you will need to access the blunt cut wires under your driver's side dash. Once you have these you can connect your aftermarket brake controller. I recommend…

view full answer...

Answer 6

We actually have the Brake Buddy 32220 reverse solenoid available with the Titan Solenoid Valve Replacement Kit #TK71-755-00. The solenoid itself would be an exact replacement and it features the two mounting holes at the bottom like you described…

view full answer...

Answer 7

The etrailer.com Coupler Lock #e98888 will work perfectly with the Titan Leverlock Coupler #T4845000 to help protect your trailer while it's in storage. This heavy-duty pin simply takes the place of the existing pin on the coupler to either…

view full answer...

Answer 8

The AMPLock Trailer Coupler Lock #AMP84FR is the most secure lock we carry for your Titan Zinc-Plated, Leverlock Coupler #T4845000. This lock uses a laser cut style key and the cast iron construction prevents damage from shock and cutting tools. The…

view full answer...

Answer 9

The right and left orientation is determined if you are standing behind the trailer looking towards the tow vehicle. The left side is the drivers side and the right side is the passengers side. Tthe shorter brake pad will always be in the front of…

view full answer...

Answer 10

Damage wouldn't necessarily occur but the braking power would be drastically diminished. You would need get the correct side assembly on your trailer axle.

view full answer...

Answer 11

If one set of brake assemblies is on the wrong side of the axle, it will lead to diminished braking performance and premature brake wear. Is it possible that the axle was removed at one time and reinstalled incorrectly? If you look at the photo I…

view full answer...

Answer 12

Yes, the Redarc Tow Pro Liberty part #RED52VR can install in your 2023 Ford Ranger that has the factory 7-way. It would wire directly to the brake controller install wiring that is present under the dash.

view full answer...

Recommendation for a Coupler Lock for a Collar-Loc Trailer Coupler

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching