Replacement Cover For Truxedo LoPro QT Tonneau For 2011 Ford F-250 With 6-3/4 Foot Bed

Question

Question:

I have an 2011 F250 with a tool box and a Truxedo LoPro QT tonneau cover and I have a few rips in it. Is there a replacement cover available?

asked by: Todd B

0

Expert Reply:

A cover is available for your Truxedo LoPro QT, it is Replacement Cover for TruXedo Lo Pro QT Soft, Roll-up Tonneau Cover - Black, # TX569101-CVR. This replaces the tarp on your TruXedo Lo Pro QT soft, roll-up tonneau cover # TX569101. It does require original Lo Pro QT hardware and rails for installation.

expert reply by: Jason S

0

Answer 1

On the underside of the cover you may find a tag or a number actually printed on the bottom of the cover. But if you know the model of the TruXedo cover then I can figure out which replacement cover you will need for your 2008 Ford F-150 with 5-1/2…

view full answer...

Answer 2

You will need the Replacement Cover #TX569101-CVR for the TruXedo Lo Pro Soft Roll-up Tonneau Cover #TX569101 on your 2011 Ford F-350 short bed truck. The Replacement Cover #TX259101-CVR fits the TruXedo TruXport Soft, Roll-Up Tonneau Cover…

view full answer...

Answer 3

The date code you kindly provided identifies your existing tonneau as a TruXedo Lo Pro #TX569101, according to my TruXedo representative. The replacement tarp for that cover is part #TX569101-CVR.

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

That part number indicates you have a Truxedo Lo Pro QT tonneau on your 2008 Ford F-150 with a 6-1/2 foot bed so for a tonneau tarp replacement you'd want the #TX1117655 and you'd be set.

view full answer...

Answer 7

The correct replacement cover for the TruXedo Lo Pro QT Soft Roll-up Tonneau Cover part #TX539801 on your 2006 Chevrolet Colorado is the Replacement Cover for TruXedo Lo Pro QT Soft, Roll-up Tonneau Cover part #TX539801-CVR.

view full answer...

Answer 8

I have a great solution for you. I went ahead and reached out to my contact at TruXedo, and she determined that the cover that you have in your pictures is the TruXedo Lo Pro Soft Roll-up Tonneau Cover - Black #TX539801. This cover is designed to fit…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement Cover For Truxedo LoPro QT Tonneau For 2011 Ford F-250 With 6-3/4 Foot Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching