Recommended Trailer Hitch Receiver For 2015 BMW X5

Question

Question:

I wanted to check on what the options for a trailer hitch are for the following vehicle. He has a 2015 BMW X5 Diesel with the M package. Thanks.

asked by: Vanessa

0

Expert Reply:

We have two options for trailer hitches for a 2015 BMW X5 that will fit all their motor and package options. The options are the Curt Class III 2 inch, # 13077, and the Draw-Tite Max-Frame Trailer Hitch Receiver Class III - 2 inch, # 75600. Both trailer hitches will require fascia trimming, but will not require any drilling into your frame. Both hitches are very good quality and will hold up very well. I recommend the Draw-Tite option based on the look and the fact that it does not require a stabilization strap like the Curt hitch does, # 18050, for non-trailer loads such as bike racks and cargo carriers. I also like that the Draw-Tite hitch allows for weight distribution where the Curt does not, so it is a more well rounded hitch. I've attached a video of your options.

If you will be towing with this trailer hitch receiver, I recommend using the etrailer.com Ball Mount Kit for 2" Hitches - 7,500 lbs, # 989900. This will give you two different draw bar options and two different hitch ball options to give you the ability to tow different trailers level. I've attached an article on choosing a ball mount to help.

To add wiring for a trailer connection, I recommend the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT. This wiring it will give you a 4-way flat trailer connection by attaching to wires behind your tail lights and has a modulite that is powered by running a power wire directly from your battery to protect your vehicle's factory wiring. The installation video is attached.

expert reply by: Jason S

0

Answer 1

Per the linked instructions, the etrailer brand #e84AR Class III hitch will require trimming a 4 x 2-1/4 inch piece of the bumper fascia away. I've linked to an install video for the #13077 hitch which installs in the same manner.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

For your 2017 BMW X5 we do have trailer lighting harnesses like the Curt part #C56190KIT which plugs into the vehicle taillight harnesses for an easy install.

view full answer...

Answer 4

We do have wiring harnesses for the 2017 BMW X5 diesel to go with a hitch like the Curt #13077. If you wanted everything in a complete package that includes the hitch, wiring, ball mount for towing and a receiver that can be used to carry hitch…

view full answer...

Answer 5

The Draw-Tite #76271 and our etrailer #e83ZR trailer hitch receivers do have a fairly similar construction. While the Draw-Tite is listed at a higher towing and tongue weight capacity these numbers do not mean a lot since both are rated for more…

view full answer...

Answer 6

I took a look for you and can confirm that there is no trimming of any fascia required to install the EcoHitch you asked about that fits your 2017 BMW X5: - EcoHitch Stealth Trailer Hitch Receiver #EH44FR This is a really cool choice for a hitch on…

view full answer...

Answer 7

In the attached diagram the A measurement is actually the distance from the center of the spring hangers for a single axle trailer. The spring eye to spring eye measurement for your leaf springs will be slightly different. The B measurement that you…

view full answer...

Answer 8

We can definitely help set you up with a tow package for your 2024 Kia Telluride. The main components you will need are a hitch, 7-way wiring harness, and a brake controller. You will need a good ball mount too, but it sounds like you have that…

view full answer...

Answer 9

The Curt Trailer Hitch Receiver #13077 will fit on your 2017 BMW X5 with the M Sport Package, but you will need to cut the rear fascia for it to fit. Attached is an install video we did of this hitch on a 2017 X5 but it didn't have the M Sport…

view full answer...

Answer 10

The "KTC 7600" stamped on the brake pad doesn't look to be a part number, so I can't cross reference it, but we do know you have Kodiak ceramic brake pads. So to determine the correct brake pads, all you need to do is match up…

view full answer...

Answer 11

Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…

view full answer...

Recommended Trailer Hitch Receiver For 2015 BMW X5

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching