I'm Looking At An Aluminum Butt Hinge For My Horse Trailer Ramp, Is This A Good Hinge?
Question:
hi I have an old horse trailer . looking at your butt hinge for the ramp is this a good hinge for the trailer if so how many hinges do I need ?
asked by: Kenneth B
Expert Reply:
An aluminum butt hinge like Polar's # PLR1005 is a durable hinge that could work great on your horse trailer. My only concern with this hinge for your application is if your frame is steel instead of aluminum which could cause galvanic corrosion because they are dissimilar metals. If your frame is aluminum, I think this is a great choice and you will just need to be careful welding. I don't know how many you would need for your application, but most trailers use a minimum of 3 or 4.
If you have a steel frame, I'd recommend you go with the Polar Ramp Door Hinge, # PLR1902. This hinge has a grease fitting, and has an unfinished exterior to make it easier to weld. I've included a review video for you.
Products Referenced in This Question
Ramp Door Hinge - 8-3/16" Long - 1" Pin Diameter - Steel
- Trailer Door Hinges
- Ramp Door Hinge
- Greasable Pin
- Steel
- 8-3/16 Inch Long
- 4 Inch Wide
- Weld-On
- Polar Hardware
more information >
Product Page this Question was Asked From
Butt Hinge w/ Removable Pin - 5" Long x 4-7/8" Wide - 1/2" Pin Diameter - Aluminum
- Trailer Door Hinges
- Butt Hinge
- Removable Pin
- Aluminum
- 5 Inch Long
- 3/16 Inch Diameter
- 4-7/8 Inch Wide
- Bolt-On - No Pre-Drilled Holes
- Weld-On
- Polar Hardware
more information >
Continue Researching
- Shop: Ramp Door Hinge - 8-3/16" Long - 1" Pin Diameter - Steel
- Video: Polar Hardware Enclosed Trailer Parts - Doors - PLR1902 Review
- Q&A: Weight Rating Of Seal Strap Hinge
- Search Results: ramp hinges
- Shop: Hinge - 9-1/8" Long x 3" Wide - Stainless Steel
- Video: Polar Hardware Enclosed Trailer Parts - Doors - PLR109-SS Review
- Video: Optronics Trailer Lights - Clearance Lights - MCL95RB Review
- Shop: Over the Seal T-Strap Hinge w/ Narrow Bracket - 180 Degree - 12"Long - Polished Stainless Steel
- Q&A: Replacement Hinge Recommendation for MAXXD Dump Trailer
- Q&A: Can Bolt of Dump Door Hinge # PLR1904-Z Be Removed
- Q&A: Aluminum Hinge for a Utility Trailer Tailgate
- Q&A: Can Barn Doors of Trailer Ramp be Changed to Ramp Door
- Q&A: Dimensions of Polar Steel Dump Door Hinge PLR1904-Z
- Q&A: Recommended Hinges And Ramp Assist For Steel Ramp
- Video: Polar Hardware Enclosed Trailer Parts - Doors - PLR2512-SSP Review
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Video: etrailer Enclosed Trailer Transition Plate Review
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Shop: Trailer Hitch
- Search Results: 68149
- Shop: Trailer Wiring
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Grease Seals 10-36 (pair)
- Video: Titan Trailer Brakes T2385200 Review
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 25580
- Shop: Brake Controller
- Article: Trailer Tire Sizing